Prediction and analysis of thermal‐hydraulic performance of tubes with teardrop dimples based on artificial neural networks
Authors:
- 11 February 2021
- journal article
- research article
- Published by Wiley in The Canadian Journal of Chemical Engineering
- Vol. 100 (1) , 202-220
Abstract
In this study, the prediction and analysis of the thermal‐hydraulic performance of tubes with teardrop dimples were carried out. First, a numerical model of dimpled tubes using ANSYS 17.0 was established and verified by comparison with the Nusselt number (Nu) and friction factor (f) in the literature. Second, artificial neural networks (ANNs) were developed with five neurons in the input layer, the hidden layers of various neurons, and one neuron in the output layer. The five neurons are the diameter of the windward sphere (d1), diameter of the leeward sphere (d2), dimple depth (hd), spacing between two axially adjacent dimples (l), and quantity of dimples in a transverse cross‐section (N). After careful comparison, the model with the 5‐2‐6‐1 structure was selected for predicting both f and Nu, while the model with the 5‐6‐1 structure was selected for performance evaluation criteria (PEC). Finally, the influence of d2/d1 on the heat transfer and pressure drop is discussed when l/d1 or N changes. The results showed when N is moderate or l/d1 is large within the scope of the design, the heat transfer performance in the windward part of the teardrop dimples is better than that of the spherical dimples. In addition, as N increases or l/d1 decreases, the influence of dimples on the main flow increases, making the mixture of hot and cold working fluid better but causing a greater pressure drop. This study may provide ideas and guidance for the design, selection, and optimization of dimpled tubes.Keywords
Funding Information
- China Postdoctoral Science Foundation (2019M663707)
- National Natural Science Foundation of China (51976146, 52006164)
This publication has 29 references indexed in Scilit:
- Heat transfer of turbulent flow over surfaces with spherical dimples and teardrop dimplesExperimental Thermal and Fluid Science, 2015
- Flow structures and heat transfer on dimples in a staggered arrangementInternational Journal of Heat and Fluid Flow, 2012
- Heat transfer and hydrodynamics analysis of a novel dimpled tubeExperimental Thermal and Fluid Science, 2010
- Heat Transfer and Friction Characteristics for Turbulent Flow of Dimpled TubesChemical Engineering & Technology, 2009
- Performance predictions of laminar and turbulent heat transfer and fluid flow of heat exchangers having large tube-diameter and large tube-row by artificial neural networksInternational Journal of Heat and Mass Transfer, 2009
- Heat transfer analysis of phase change process in a finned-tube thermal energy storage system using artificial neural networkInternational Journal of Heat and Mass Transfer, 2007
- Artificial neural networks for the prediction of the energy consumption of a passive solar buildingEnergy, 2000
- Forecasting with artificial neural networks:International Journal of Forecasting, 1998
- Performance of shell-and-dimpled-tube heat exchangers for waste heat recoveryHeat Recovery Systems and CHP, 1988
- Author IndexAdvances in Heat Transfer, 1970