EHP VALUE OF MINI LNG SHIP WITH FORM FACTOR FROM PROHASKA AND IRLS METHOD USING SHIP RESISTANCE TESTING DATA
Open Access
- 25 June 2023
- journal article
- research article
- Published by Penerbit UTM Press in Jurnal Teknologi (Sciences & Engineering)
- Vol. 85 (4) , 45-54
Abstract
The ship model test was believed to be one of the effective methods for figuring out the boundaries and reliability of the ship's horsepower. The ship's form factor determines a full-scale ship's effective horsepower. Determination of the form factor value can be done experimentally through the Prohaska method. The new method proposed in this study is employed the regression Iteratively Reweighted Least Squares (IRLS) method by utilizing the principle dimension of the ship, such as LWL, B, CB, CP, CM, WSA, T, ∆. etc. The Indonesian Hydrodynamics Laboratory has a database of ships with various principle dimensions which have undergone the towing model test. Through the database, the form factor can be predicted with the IRLS method. The method is then verified and validated with the Prohaska method. The result shows a good agreement with the Prohaska method. The obtained results from the IRLS method also show that the EHP & Resistance calculations are identical with old fashion Prohaska methods. The residual bias factor established by the IRLS method was verified in comparison to the value of the form factor generated by the Prohaska method. Comparison between the two methods results in a small error.Keywords
This publication has 28 references indexed in Scilit:
- Computational simulations of transitional flows around turbulence stimulators at low speedsInternational Journal of Naval Architecture and Ocean Engineering, 2021
- Exploring the effects of speed and scale on a ship’s form factor using CFDInternational Journal of Naval Architecture and Ocean Engineering, 2021
- Scale effect on ship resistance components and form factorOcean Engineering, 2020
- Numerical simulation of resistance performance according to surface roughness in container shipsInternational Journal of Naval Architecture and Ocean Engineering, 2020
- Full-scale CFD simulations for the determination of ship resistance as a rational, alternative method to towing tank experimentsOcean Engineering, 2019
- Assessment of hydrodynamic characteristics of a full-scale ship at different draughtsOcean Engineering, 2018
- Computational Ship Design2018
- Side wall effects on ship model testing in a towing tankOcean Engineering, 2018
- Resistance and Propulsion2012
- Study on the form factor and full-scale ship resistance prediction methodJournal of Marine Science and Technology, 2009