Effects of Hydrogen Blending Ratio and Equivalence Ratio on the Dynamic Characteristics of Deflagration Shock Waves of CH4/H2 Mixtures
Open Access
- 21 May 2024
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (22) , 23853-23863
Abstract
To evaluate the explosion hazard of CH4/H2 mixtures, experiments were conducted in a long and closed pipeline with a length-to-diameter ratio of 51 and built-in obstacles, and the characteristic parameters of deflagration shock waves were analyzed under different hydrogen blending ratios (0 ≤ λ ≤ 100%) and equivalence ratios (0.5 ≤ Φ ≤ 3). The results indicate that within the range of Φ = 0.8-1.2, the explosion overpressure (P P) exhibits a "two-zone" structure distribution. When 0 ≤ λ ≤ 80%, P P shows an initial increase and then a decrease in both regions, while deflagration to detonation transition (DDT) occurs in the second evolution region when λ = 100%, which is caused by the different strengths of the positive feedback mechanism coupled with flames and shock waves. The P max, (dP/dt)max, and V a show a trend of first increasing and then decreasing and monotonically increasing with the increase of the equivalence ratio and hydrogen blending ratio, respectively, and reach their maximum values at Φ = 1.0 and λ = 100%. For CH4/H2 mixtures with low hydrogen blending ratios (λ = 0 and 20%), the P max and (dP/dt)max in the fuel-lean conditions (Φ = 0.9 and 0.8) are higher than those in the fuel-rich conditions (Φ = 1.1 and 1.2), while the CH4/H2 mixtures under high hydrogen blending ratios (λ = 80 and 100%) are the opposite. Overall, the increase in H2 at a high hydrogen blending ratio and the increase in the equivalence ratio at a fuel-lean condition significantly enhance the average V a. In addition, chemical kinetics analysis found that R38 and R52 elementary reactions are the dominant elementary reactions that promote and inhibit temperature increase, respectively. Their temperature sensitivity coefficients are negatively correlated with the hydrogen blending ratio and positively correlated with the equivalence ratio. The research results provide vital information for evaluating the explosion hazards of CH4/H2 mixtures and developing safety protection measures.Keywords
Funding Information
- National Key Research and Development Program of China (2022YFC3006301)
- National Natural Science Foundation of China (12172053, 12302433)
This publication has 48 references indexed in Scilit:
- Climate change, energy security risk, and clean energy investmentEnergy Economics, 2023
- In-situ measurement of hydrogen entry and hydrogen embrittlement of steel by atmospheric corrosionCorrosion Science, 2023
- Effects of fuel component, airflow field and obstacles on explosion characteristics of hydrogen/methane mixtures fuelEnergy, 2022
- Experimental study of effect of equivalence ratio and initial turbulence on the explosion characteristics of LPG/DME clean blended fuelEnergy, 2022
- Flame structure and burning velocity of ammonia/air turbulent premixed flames at high Karlovitz number conditionsCombustion and Flame, 2022
- Hydrogen embrittlement mechanisms in advanced high strength steelActa Materialia, 2022
- Effect of initial temperature and H2 addition on explosion characteristics of H2-poor/CH4/air mixturesEnergy, 2020
- Influence of kinetics on DDT simulationsCombustion and Flame, 2019
- Flame propagation and combustion modes in end-gas region of confined spaceCombustion and Flame, 2018
- Effects of the equivalence ratio on turbulent flame–shock interactions in a confined spaceCombustion and Flame, 2017