Finite element simulations of the laser-heated diamond-anvil cell
Authors:
- 24 May 2005
- journal article
- conference paper
- Published by AIP Publishing in Journal of Applied Physics
- Vol. 97 (11) , 114902
Abstract
Axial and radial temperature gradients in the laser-heated diamond-anvil cell are examined using finite element simulations. Calculations are carried out for an optically thin silicate or oxide sample separated from the diamonds by an insulation medium and heated by a mode from an infrared laser. The peak temperature of the simulations was chosen to be a representative value and sample dimensions are typical for experiments in the range. The distance between the anvils is . The total temperature drop across the sample in the axial direction is controlled by two parameters: the filling fraction (thickness of sample∕distance between anvils) and the ratio of thermal conductivity between the sample and insulator . The results of the numerical calculations agree well with a one-dimensional numerical model. For a sample filling fraction of 0.5, the axial temperature drop will range from about for a thermal conductivity ratio of 1 to about for a conductivity ratio of 10. If the conductivity ratio between sample and insulator is reduced to 1, then a sample filling fraction of less than 0.1 is required to keep the axial temperature decrease to be less than 10%. The effects of asymmetric samples and variations in absorption length are also examined. For a given gasket thickness and conductivity ratio, we find that radial gradients are minimal at a filling fraction of about 50% and then increase at higher and lower filling ratios. The anvil surface remains close to room temperature in all calculations. Our results demonstrate that reduction of axial temperature variations in optically thin laser-heated samples requires the use of thick, low thermal conductivity insulation media.
Keywords
This publication has 55 references indexed in Scilit:
- Thermal diffusivity and conductivity of olivine, wadsleyite and ringwoodite to 20 GPa and 1373 KPhysics of the Earth and Planetary Interiors, 2004
- Stability and crystal structure of MgSiO3 perovskite to the core‐mantle boundaryGeophysical Research Letters, 2004
- Structure of Liquid Iron at Pressures up to 58 GPaPhysical Review Letters, 2004
- Stability of CaCl2‐type and α‐PbO2‐type SiO2 at high pressure and temperature determined by in‐situ X‐ray measurementsGeophysical Research Letters, 2003
- Temperature gradients in the laser‐heated diamond anvil cellJournal of Geophysical Research, 2001
- Laser heated diamond anvil apparatus at the Photon Factory and SPring-8: Problems and improvementsReview of Scientific Instruments, 2001
- ASDP: a PC-based program using a multi-algorithm approach for automatic detection and location of local earthquakesPhysics of the Earth and Planetary Interiors, 1999
- Melting and crystal structure of iron at high pressures and temperaturesGeophysical Research Letters, 1998
- Thermal conductivity of corundum and periclase and implications for the lower mantleJournal of Geophysical Research, 1997
- Temperature distribution in the laser‐heated diamond cell with external heating, and implications for the thermal conductivity of perovskiteGeophysical Research Letters, 1996