Working Mechanism of Pile Group with Different Pile Spacing in Dense Sand
Open Access
- 1 January 2019
- journal article
- research article
- Published by Wiley in Advances in Civil Engineering
- Vol. 2019 (1)
Abstract
Complex interaction mechanism exists between the pile group and soil. To realize the pile‐soil load transmission mechanism in detail, the failure pattern of pile groups installed in dense sand considering different pile spacing was investigated by means of laboratory experimental model test and three‐dimensional discrete element method. The results suggested that the narrow pile spacing was beneficial to the development of the pile tip resistance, and it enhanced the bearing performance of the pile group at the initial stage of settlement. The pile spacing changed the shaft resistance pattern with modification of the strain energy mechanism released within the subsoil. The pile group with 6b pile spacing had higher composite group efficiency. A joint fan‐shaped displacement zone was formed beneath the pile tip for the pile group with 3b pile spacing; this pile foundation presented the block failure mechanism. The sand displacement beneath the cap for the pile group with 6b pile spacing mainly located on the upper part of the piles, the sand displacement around both sides of the piles presented asymmetric, and a relatively independent fan‐shaped displacement zone was formed beneath the pile tip.Keywords
Funding Information
- National Natural Science Foundation of China (51408254, JZ-051)
This publication has 45 references indexed in Scilit:
- Discrete element modelling of cavity expansion and pressuremeter testGeomechanics and Geoengineering, 2013
- Coupled 3D discrete-continuum numerical modeling of pile penetration in sandJournal of Zhejiang University-SCIENCE A, 2012
- Physical modelling of pile penetration in clay using transparent soil and particle image velocimetryGéotechnique, 2010
- A numerical examination of the direct shear testGéotechnique, 2007
- Influence of pile shape and pile interaction on the crushable behavior of granular materials around driven piles: DEM analysesGranular Matter, 2007
- Displacement and strain paths during plane-strain model pile installation in sandGéotechnique, 2004
- Science and empiricism in pile foundation designGéotechnique, 2003
- Failure mechanisms and bearing capacities of reinforced foundationsGeotextiles and Geomembranes, 2001
- Particle Motion Tracking Utilizing a High-Resolution Digital CCD CameraGeotechnical Testing Journal, 2000
- Influence of Roughness of Base and Ground-Water Conditions On The Ultimate Bearing Capacity of FoundationsGéotechnique, 1955