RESIDUAL STRESS FIELDS DURING FATIGUE CRACK GROWTH
Authors:
- 1 February 1992
- journal article
- Published by Wiley in Fatigue & Fracture of Engineering Materials & Structures
- Vol. 15 (2) , 115-128
Abstract
This study outlines the distinction between (1) residual stresses at an ideal crack tip, undergoing reversed deformation in the absence of crack closure, and (2) additional residual stresses generated due to plasticity induced closure upon fatigue crack growth. Residual stresses resulting from reversed deformation in plane strain were higher compared to the plane stress case, while residual stresses generated behind the crack tip were more significant in plane stress compared to plane strain. The origin of these residual stresses was studied for two specimen geometries over a wide range of loading conditions. We define a new crack tip parameter, Stt as the applied stress level that corresponds to the development of tensile stresses immediately ahead of crack tips. The Stt levels were significantly higher for a fatigue crack than for an ideal crack. We attribute the difference in Stt levels between these two cases to plasticity induced closure. The results demonstrate the importance of the Stt parameter, since the stresses ahead of crack tips could remain compressive even when the crack surfaces are open. Moreover, the study emphasizes the need, when describing fatigue crack growth, to incorporate both the closure concept and residual stress field ahead of a crack tip.Keywords
This publication has 13 references indexed in Scilit:
- On the finite element analysis of fatigue crack closure—1. Basic modeling issuesEngineering Fracture Mechanics, 1989
- Fatigue Crack Closure Outside a Small-Scale Yielding Regime1988
- An experimental and numerical study of crack closureEngineering Fracture Mechanics, 1985
- Crack-tip stresses as computed from strains determined by stereoimagingExperimental Mechanics, 1983
- X-ray diffraction determination of stress distribution in specimens with fatigue cracksStrength of Materials, 1981
- FATIGUE CRACK CLOSURE AND DELAY EFFECTS UNDER MODE I SPECTRUM LOADING: AN EFFICIENT ELASTIC–PLASTIC ANALYSIS PROCEDUREFatigue & Fracture of Engineering Materials & Structures, 1979
- Analysis of Closure in Fatigue Crack GrowthJournal of Applied Mechanics, 1978
- Recent German activities in the field of x-ray stress analysisMaterials Science and Engineering, 1977
- A Finite-Element Analysis of Fatigue Crack Closure1976
- Study of fatigue crack propagation by X-ray diffraction approachEngineering Fracture Mechanics, 1972