Pool Boiling Heat Transfer Enhancement Through Nanostructures on Silicon Microchannels
- 1 August 2012
- journal article
- Published by Wiley in Journal of Nanotechnology in Engineering and Medicine
- Vol. 3 (3) , 031002
Abstract
Uniform silicon nanowires (SiNW) were successfully fabricated on the top, bottom, and sidewall surfaces of silicon microchannels by using a two-step electroless etching process. Different microchannel patterns with the channel width from 100 to 300 μm were first fabricated in a 10 mm × 10 mm silicon chip and then covered by SiNW with an average height of 10–20 μm. The effects of the microchannel geometry, micro/nano-hierarchical structures on pool boiling were studied and the bubble dynamics on different sample surfaces were compared. It was found that the combination of the micro/nanostructures promoted microbubble emission boiling under moderate heat fluxes, and yielded superior boiling heat transfer performance. At given wall superheats, the maximum heat flux of the microchannel with SiNW was improved by 120% over the microchannel-only surface, and more than 400% over a plain silicon surface. These results provide a new insight into the boiling mechanism for micro/nano-hierarchical structures and demonstrate their potential in improving pool boiling performance for microchannels.Keywords
This publication has 24 references indexed in Scilit:
- Effect of open microchannel geometry on pool boiling enhancementInternational Journal of Heat and Mass Transfer, 2012
- Direct growth of copper nanowires on a substrate for boiling applicationsMicro & Nano Letters, 2011
- Curved Silicon Nanowires with Ribbon-like Cross Sections by Metal-Assisted Chemical EtchingACS Nano, 2011
- Parametric Numerical Study of Flow and Heat Transfer in Microchannels With Wavy WallsJournal of Heat Transfer, 2011
- Pool Boiling Heat Transfer and Bubble Dynamics Over Plain and Enhanced MicrochannelsJournal of Heat Transfer, 2011
- Characterization of evaporation and boiling from sintered powder wicks fed by capillary actionInternational Journal of Heat and Mass Transfer, 2010
- Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copperInternational Journal of Heat and Mass Transfer, 2010
- Nanostructured Copper Interfaces for Enhanced BoilingSmall, 2008
- Silicon nanopillars based 3D stacked microchannel heat sinks concept for enhanced heat dissipation applications in MEMS packagingSensors and Actuators A: Physical, 2008
- 3-Dimensional numerical optimization of silicon-based high performance parallel microchannel heat sink with liquid flowInternational Journal of Heat and Mass Transfer, 2007