Comparative performance evaluation between ta-C and TiAlCrN coated tools during milling of additively manufactured CFRP composite
- 2 January 2024
- journal article
- research article
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering
- Vol. 239 (3) , 1154-1170
Abstract
Due to the excellent strength-to-weight ratio and corrosion resistance properties, the application of carbon fibre-reinforced plastic (CFRP) composites is rising among various industries day-by-day. This research addresses the performance evaluation of tetrahedral amorphous hard carbon (ta-C) and TiAlCrN coated carbide tools during milling of additively manufactured CFRP composite under dry environment. Tool rotational (spindle) speed, feed and depth of cut are considered as the variable factors in order to evaluate the machining performance characteristics in milling operation concerning surface roughness (Ra), cutting force (Fc) and cutting temperature (T). Taguchi's L 16 orthogonal array design of experiments was adopted to conduct the machining trials under various settings of process variables. The relative influence of the different types of coatings and different operating parameters on machined surface morphology in milling was analysed by scanning electron microscope. From the experimental results, a promising machining performance is noticed for TiAlCrN coated carbide end milling tool accomplished by physical vapour deposition technique in terms of all machining attributes compared to ta-C coated end milling tool due to superior wear resistance, surface hardness and bonding strength of coating material. Among the tools used, TiAlCrN coated carbide tools for CFRP milling application promises excellent machinability performances in terms of reduced cutting force, enhanced machined surface morphology as well as surface finish, and minimum cutting temperature. The mean value ratios for Ra ta-C / Ra TiAlCrN , Fc ta-C / Fc TiAlCrN and T ta-C / T TiAlCrN are 1.44, 1.24 and 1.21, respectively.Keywords
This publication has 37 references indexed in Scilit:
- Characterization of mechanical properties and fracture mode of additively manufactured carbon fiber and glass fiber reinforced thermoplasticsMaterials & Design, 2018
- Experimental study on effects of fiber cutting angle in milling of high-strength unidirectional carbon fiber–reinforced polymer laminatesProceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017
- Analysis of carbon fibre reinforced polymers milling by diamond electroplated toolDiamond and Related Materials, 2017
- Surface Quality of Staggered PCD End Mill in Milling of Carbon Fiber Reinforced PlasticsApplied Sciences, 2017
- Surface modification of carbon fibers and the selective laser sintering of modified carbon fiber/nylon 12 composite powderMaterials & Design, 2017
- Analysis of Tool Wear, Cutting Force, Surface Roughness and Machining Temperature During Finishing Operation of Ultrasonic Assisted Milling (UAM) of Carbon Fibre Reinforced Plastic (CFRP)Procedia Engineering, 2017
- The effect of cutting temperature in milling of carbon fiber reinforced polymer compositesComposites Part A: Applied Science and Manufacturing, 2016
- Preparation and characterization of carbon fiber-reinforced thermosetting composites: a reviewCarbon Letters, 2015
- Tribological characteristics of amorphous hydrogenated (a-C:H) and tetrahedral (ta-C) diamond-like carbon coating at different test temperatures in the presence of commercial lubricating oilSurface and Coatings Technology, 2014
- Heat generation and temperature prediction in metal cutting: A review and implications for high speed machiningInternational Journal of Machine Tools and Manufacture, 2006