Scaling of continuous twin screw wet granulation
- 14 September 2016
- journal article
- research article
- Published by Wiley in AIChE Journal
- Vol. 63 (3) , 921-932
Abstract
Scaling rules were developed and tested for a continuous twin screw wet granulation process using three scales (11, 16, and 24 mm barrel diameter) of twin screw granulators (TSG). The distributive feed screw configuration used produced high porosity granules (50–60%) with broad bimodal size distributions, especially in the 16 and 24 mm TSGs. Three dimensionless numbers, Froude number (Fr), liquid‐to‐solid ratio (LSR), and powder feed number (PFN), were identified and their effect on granule size distribution (GSD), porosity and liquid distribution tested. Granule size increased with increasing LSR as expected. However, Fr and PFN had no significant effect on d10 or d50 and only a small effect on d90. In contrast, granulator scale had a strong effect on GSD, with d90 increasing almost linearly with barrel diameter. This is consistent with breakage of large granules being a dominant mechanism and directly controlled by the geometry of the screw. © 2016 American Institute of Chemical Engineers AIChE J, 63: 921–932, 2017Keywords
Funding Information
- Eli Lilly and Company
This publication has 20 references indexed in Scilit:
- Twin screw granulation using conveying screws: Effects of viscosity of granulation liquids and flow of powdersPowder Technology, 2013
- Continuous twin screw granulation: Influence of process variables on granule and tablet qualityEuropean Journal of Pharmaceutics and Biopharmaceutics, 2012
- Twin screw wet granulation: Granule propertiesChemical Engineering Journal, 2010
- Wet Granulation in a Twin‐Screw Extruder: Implications of Screw DesignJournal of Pharmaceutical Sciences, 2010
- Continuous granulation with a twin-screw extruder: Impact of material throughputPharmaceutical Development and Technology, 2009
- Effect of operating conditions and physico–chemical properties on the wet granulation kinetics in high shear mixerPowder Technology, 2009
- Comparison of two twin-screw extruders for continuous granulationEuropean Journal of Pharmaceutics and Biopharmaceutics, 2009
- Impact of screw elements on continuous granulation with a twin-screw extruderJournal of Pharmaceutical Sciences, 2008
- Continuous granulation in the pharmaceutical industryChemical Engineering Science, 2005
- Particle size analysis by sieving2003