Measurement of Sand Moisture From Weight and Capacitance
- 27 December 2023
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 24 (3) , 2429-2435
Abstract
Moisture meters are widely used in various industries and environmental-related fields, and thus the methods have been standardized. This paper describes an instantaneous and absolute moisture measurement method for sand. The conventional absolute moisture meter heats a target material and measures the weight difference before and after heating and determines the moisture content. This method requires a heating process; therefore, it is time-consuming. Sand pulverized from the rock with an average density of 2.58 g/cm 3 and an average relative dielectric constant of 5.50 were used to constitute the sand. Utilizing these known values, we propose an absolute moisture measurement method for sand from weight and capacitance. We constricted a measurement principle and a calibration method based on static electricity theory and verified the principle through experiments. From the dry state of sand, water is dispersed on the sand in increments of 5 cm 3 to 40 cm 3 and measured them. The measured values are evaluated through the ASTM evaluation for instruments. The repeatability was 1.21%. The limit of detection, limit of quantitation, linearity, and bias value were 0.22 cm 3 , 0.66 cm 3 , 0.28 %, and 0.51 cm 3 , respectively, which are satisfactory.Keywords
This publication has 16 references indexed in Scilit:
- Advances in Micro-Fabricated Fiber Bragg Grating for Detection of Physical, Chemical, and Biological Parameters—A ReviewIEEE Sensors Journal, 2022
- Inter-Comparison of Proximal Near-Surface Soil Moisture Measurement TechniquesIEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing, 2022
- Recent Advances in Two-Dimensional Materials-Based Kretschmann Configuration for SPR Sensors: A ReviewIEEE Sensors Journal, 2021
- Application of three self-developed ECT sensors for monitoring the moisture content in sand and mortarConstruction and Building Materials, 2021
- Battery-Less HF RFID Sensor Tag for Soil Moisture MeasurementsIEEE Transactions on Instrumentation and Measurement, 2020
- Toward P-Band Passive Microwave Sensing of Soil MoistureIEEE Geoscience and Remote Sensing Letters, 2020
- Mini Inside-Out Nuclear Magnetic Resonance Sensor Design for Soil Moisture MeasurementsSensors, 2019
- Design and Characterization of a Fringing Field Capacitive Soil Moisture SensorIEEE Transactions on Instrumentation and Measurement, 2018
- The Effect of Moisture on the Flowability of Pharmaceutical ExcipientsAAPS PharmSciTech, 2013
- Using Imaging Spectroscopy to study soil propertiesRemote Sensing of Environment, 2009