Development of Optical Tomography System Based on Fan-Beam Lasers
- 18 August 2022
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Sensors Journal
- Vol. 22 (19) , 18718-18725
Abstract
The sensor configuration and the sensitivity matrix are two key factors for the optical tomography system. In this work, these two factors are investigated to develop an optical tomography system. First, different sensor configurations are investigated, and their reconstruction performance is estimated. The regular configuration with 25 laser emitters and 25 detectors is selected due to its high reconstruction accuracy and simple structure. Meanwhile, the influence of the pixel grid on the reconstruction performance is also considered. Simulation results indicate that the pixel grid of $50\times50$ is appropriate when the diameter of the region of interest (ROI) is 100 mm, while a denser grid will deteriorate the performance. A practical tomography system is developed based on the $25\times25$ configuration with fan-beam laser diodes and plastic fibers as light detectors. The reconstruction experiments are implemented based on the suggested $50\times50$ pixel grid. Experimental results verify that the effectiveness of the developed system and different distributions can be clearly reconstructed.Keywords
Funding Information
- National Science Foundation of China (51906053)
This publication has 27 references indexed in Scilit:
- Multispectral time-resolved diffuse optical tomography system for absorber mapping in turbid medium using wide-field single-pixel camera2015
- Application of Optical Tomography for Monitoring Gas Bubbles Flow Based on Independent Component Analysis AlgorithmJurnal Teknologi (Sciences & Engineering), 2015
- Tomographic imaging of the liquid and vapour fuel distributions in a single-cylinder direct-injection gasoline engineInternational Journal of Engine Research, 2014
- Concentration measurements of bubbles in a water column using an optical tomography systemISA Transactions, 2012
- ECT sensor optimization based on RSM and GACOMPEL - The international journal for computation and mathematics in electrical and electronic engineering, 2012
- Anatomical atlas-guided diffuse optical tomography of brain activationNeuroImage, 2010
- Image optimization for chemical species tomography with an irregular and sparse beam arrayMeasurement Science and Technology, 2008
- Design of an optical tomograph for the investigation of single- and two-phase pipe flowsMeasurement Science and Technology, 2008
- Optical tomography sensor configuration using two orthogonal and two rectilinear projection arraysFlow Measurement and Instrumentation, 2005
- An image-reconstruction algorithm based on Landweber's iteration method for electrical-capacitance tomographyMeasurement Science and Technology, 1999