Experimental and Numerical Study of Mild Steel Behaviour under Cyclic Loading with Variable Strain Ranges
Open Access
- 23 November 2016
- journal article
- research article
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2016, 1-13
Abstract
To simulate the effect of variable strains on steel grades S275 and S355, an experimental displacement control test of plate specimens was performed. Specimens were tested under monotonic and cyclic loading according to the standard loading protocol of SAC 2000. During experimental testing, strain values were measured with an extensometer at the tapered part of the specimen. Strains obtained by the experimental tests are disproportional to the applied displacements at the ends of the specimens. This phenomenon occurs due to the imperfections of the specimen, hardening of the material, and the buckling behaviour that appears in real structures due to the high deformation experienced during earthquakes. Due to the relative simplicity and wide applicability of the Chaboche hardening model of steel, the calibration of hardening parameters based on experimental test results was conducted. For the first time, calibration of steel hardening parameters was performed following the Chaboche procedure to define the cyclic behaviour with variable strain ranges. The accuracy of the hardening model with variable strain ranges, which were simulated using ABAQUS software, was verified using the experimental results.Keywords
Funding Information
- Ministry of Science, Education and Sports of the Republic of Croatia (RC.2.2.06-0001, 13.05.1.1.01)
- European Fund for Regional Development (RC.2.2.06-0001, 13.05.1.1.01)
- University of Rijeka (RC.2.2.06-0001, 13.05.1.1.01)
This publication has 13 references indexed in Scilit:
- Dependence of the cyclic response of structural steel on loading history under large inelastic strainsJournal of Constructional Steel Research, 2015
- Experimental and modeling study of high-strength structural steel under cyclic loadingEngineering Structures, 2012
- Experimental and constitutive model study of structural steel under cyclic loadingJournal of Constructional Steel Research, 2011
- The ratchetting behavior of pressurized plain pipework subjected to cyclic bending moment with the combined hardening modelNuclear Engineering and Design, 2010
- On the calibration of the Chaboche hardening model and a modified hardening rule for uniaxial ratcheting predictionInternational Journal of Solids and Structures, 2009
- Behaviour of end-plate moment connections under earthquake loadingEngineering Structures, 2007
- Cyclic response of plate steels under large inelastic strainsJournal of Constructional Steel Research, 2007
- Finite element analysis of the three-point bending of sheet metalsJournal of Materials Processing Technology, 2002
- Cyclic Testing of Steel Moment Connections Rehabilitated with RBS or Welded HaunchJournal of Structural Engineering, 2000
- Time-independent constitutive theories for cyclic plasticityInternational Journal of Plasticity, 1986