Adhesion of Yttria-Stabilized Zirconia Coatings Deposited on Substrates from a Beam Plasma by Electron-Beam Deposition in Fore-Vacuum at Different Temperature
- 14 September 2026
- journal article
- research article
- Published by Pleiades Publishing Ltd in Bulletin of the Russian Academy of Sciences: Physics
- Vol. 90 (9) , 1686-1694
Abstract
We presented the results of a study of the substrate temperature effect on the adhesion properties of yttria-stabilized zirconia (YSZ) coatings deposited using a forevacuum plasma-cathode electron source. The adhesion strength parameters were tested with a Revetest RST Macro Scratch tester using the scratch technique. Tests were conducted gradually increasing the load from 0.5 to 100 N at a rate of 2 mm/min and a length of 3–5 mm. The value of the critical load was used to determine the adhesion strength in the coating-substrate system by measuring the applied normal load, the indenter penetration depth, acoustic emission, and the coefficient of friction. Scanning electron microscopy was employed to visualize the indenter track and coating failure. The composition of coatings and chipped area were analysed using the energy-dispersive method. It has been established that the upper value of the critical load significantly increases from 5 to 81 N as the substrate temperature increases from 197to 1050°C.Keywords
This publication has 10 references indexed in Scilit:
- Electron-Beam Synthesis of Ceramic-Based Coatings in the Forevacuum Pressure RangeBulletin of the Russian Academy of Sciences: Physics, 2024
- ELECTRON-BEAM SYNTHESIS OF ZIRCONIA CERAMIC COATINGS IN THE FOREVACUUM PRESSURE RANGEHigh Temperature Material Processes: An International Quarterly of High-Technology Plasma Processes, 2024
- Ionization mechanism of beam plasma generated by an electron beam in medium vacuumTechnical Physics Letters, 2023
- Nano-Micro-Structured 6%–8% YSZ Thermal Barrier Coatings: A Comprehensive Review of Comparative Performance AnalysisCoatings, 2021
- Study of crack resistance of TiAlN coatings by scratch testingPhysical Mesomechanics, 2017
- Damage mechanisms and cracking behavior of thermal sprayed WC–CoCr coating under scratch testingWear, 2014
- Predicting failure within TBC system: Finite element simulation of stress within TBC system as affected by sintering of APS TBC, geometry of substrate and creep of TGOEngineering Failure Analysis, 2013
- Thermal barrier coating materialsMaterials Today, 2005
- Ceramic materials for thermal barrier coatingsJournal of the European Ceramic Society, 2004
- The Evolution of Thermal Barrier Coatings in Gas Turbine Engine ApplicationsJournal of Engineering for Gas Turbines and Power, 1994