Performance of Different Fillers in Polymeric Methylene Diphenyl Diisocyanate (pMDI) Resin*
Open Access
- 1 January 2022
- journal article
- research article
- Published by Forest Products Society in Forest Products Journal
- Vol. 72 (s1) , 14-21
Abstract
This study evaluated the possibility of using different fillers—cellulose nanocrystal, cellulose microcrystalline, wood flour, soy flour, talc, and calcium carbonate—as partial substitutes in polymeric methylene diphenyl diisocyanate (pMDI) resin. There has been concern recently regarding the use of pMDI resin due to the environmental effect of isocyanate, which is dominantly present in the resin, as well as the cost of the resin. Different fillers were used in this study as substitutes at their allowable substitution percentages. This study focused on the possibility of replacing more pMDI resin with biodegradable filler without compromising the integrity of the resin; the mechanical strength of plywood from both southern yellow pine and oak was evaluated. Fourier-transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis were conducted to study the effect of modification on the bond-line quality of the final product. The effects of different fillers on adhesion properties of the pMDI resin were tested on the plywood according to the American Society for Testing and Materials (ASTM D–906-64) standard. The results showed that shear strength of the modified pMDI resins ranged from 0.3 to 1.083 MPa and 0.35 to 1.178 MPa for oak and pine plywoods, respectively. The modified samples with soy flour showed significant improvement in the shear strength with 261 and 236 percent higher shear strength than the control (pMDI) for samples from hardwood and softwood, respectively. Partial substitution of pMDI resin with soy flour at 30 percent substitution substantially improves the adhesion properties of pMDI resin.Keywords
This publication has 15 references indexed in Scilit:
- Evaluation of Irvingia kernels extract as biobased wood adhesiveJournal of Wood Science, 2020
- Properties and characteristics of novel formaldehyde-free wood adhesives prepared from Irvingia gabonensis and Irvingia wombolu seed kernel extractsInternational Journal of Adhesion and Adhesives, 2019
- Performance evaluation of a natural based adhesive derived from Irvingia wood species kernel extracts on wood panel productionJournal of Adhesion Science and Technology, 2019
- Modification of Pea Starch and Dextrin Polymers with Isocyanate Functional GroupsPolymers, 2018
- Replacing 100% of phenol in phenolic adhesive formulations with ligninJournal of Applied Polymer Science, 2017
- Adhesives from Polymeric Methylene Diphenyl Diisocyanate Resin and Recycled Polyols for PlywoodForest Products Journal, 2017
- Properties of particleboard made from rubberwood using modified starch as binderComposites Part B: Engineering, 2013
- Preparation and properties of lignin–phenol–formaldehyde resins based on different biorefinery residues of agricultural biomassIndustrial Crops and Products, 2013
- Cellulose nanofibrils as filler for adhesives: effect on specific fracture energy of solid wood-adhesive bondsCellulose, 2011
- Influence of press temperature on the properties of binderless particleboard made from oil palm trunkMaterials & Design (1980-2015), 2011