Battery smart sensing via a virtual reference electrode
Open Access
- 11 August 2026
- journal article
- research article
- Published by Springer Nature in Nature Communications
- Vol. 17 (1) , 8336
Abstract
Battery safety is regulated by management systems that use current and cell voltage to define operating limits, but these signals can miss lithium metal plating. Negative electrode potential can reveal this failure mode, yet direct measurement requires an additional reference electrode that is difficult to implement in practical cells. Here, we introduce a virtual reference electrode that estimates negative electrode potential during battery operation without a physical reference electrode. Trained on measured negative electrode potentials from three-electrode cells, the model predicts this internal state using only signals available from two-electrode cells, with root-mean-squared and mean absolute errors of 0.023 and 0.018 volts, respectively. Electron microscopy validates the predicted transition between intercalation and lithium metal plating near the thermodynamic threshold. Integrated into adaptive charging, the virtual reference electrode adjusts current in response to predicted failure risk and extends cycle life by 8.25 times relative to a constant-current constant-voltage baseline under the tested low negative-to-positive capacity ratio. More broadly, this framework may enable virtual sensing of internal battery states without changing battery chemistry or architecture.Keywords
Funding Information
- Office of Naval Research (N00014-25-1-2262)
- Office of Naval Research (N00014-25-1-2078)
- Office of Naval Research (N00014-25-1-2078)
- Office of Naval Research (N00014-25-1-2078)
- National Science Foundation (IIS-2046737)
- Army Research Office (W911NF-21-1-0216)
- Defense Advanced Research Projects Agency (W911NF-21-1-0358)
This publication has 53 references indexed in Scilit:
- Advancing Li-plating detection: Motivating a multi-signal correlation approachJournal of Energy Storage, 2024
- State-of-charge estimation of LiFePO4 batteries in electric vehicles: A deep-learning enabled approachApplied Energy, 2021
- Achieving highly reproducible results in graphite-based Li-ion full coin cellsJoule, 2021
- Rate dependency of incremental capacity analysis (dQ/dV) as a diagnostic tool for lithium-ion batteriesJournal of Energy Storage, 2020
- Recycling End-of-Life Electric Vehicle Lithium-Ion BatteriesJoule, 2019
- Operando Pressure Measurements Reveal Solid Electrolyte Interphase Growth to Rank Li-Ion Cell PerformanceJoule, 2019
- Charging protocols for lithium-ion batteries and their impact on cycle life—An experimental study with different 18650 high-power cellsJournal of Energy Storage, 2016
- Effects of Capacity Ratios between Anode and Cathode on Electrochemical Properties for Lithium Polymer BatteriesElectrochimica Acta, 2015
- Electrochemical cycling behavior of LiFePO4 cathode charged with different upper voltage limitsElectrochimica Acta, 2012
- A method for handling metabonomics data from liquid chromatography/mass spectrometry: combinational use of support vector machine recursive feature elimination, genetic algorithm and random forest for feature selectionMetabolomics, 2011