Preparation and characterization of carboxylated multiwalled carbon nanotube/polyamide composite nanofiltration membranes with improved performance
- 23 May 2017
- journal article
- research article
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 134 (36)
Abstract
Polyamide thin‐film composite nanofiltration (NF) membranes were prepared via the interfacial polymerization (IP) process of piperazine and 1,3,5‐trimesoyl chloride on the polysulfone/nonwoven fabric ultrafiltration membrane surface. Carboxylated multiwalled carbon nanotubes (cMWNTs) were incorporated into the aqueous phase during the IP process to improve the membrane performance. The composition and morphology of the membrane surface were examined by means of attenuated total reflectance–Fourier transform infrared spectroscopy, scanning electron microscopy–energy dispersive spectrometry, and atomic force microscopy. The effects of the cMWNTs content on the membrane hydrophilicity, separation performance, and antifouling properties were characterized through water contact angle and crossflow filtration measurements. The experimental results show that membrane surface hydrophilicity, water permeability, salt rejection (R), and antifouling properties all improved. In particular, when the cMWNTs content was 50 ppm, the magnesium sulfate R of the composite NF membrane reached a maximum value of 98.5%; meanwhile, the membrane obtained an obviously enhanced water flux (62.1 L m−2 h−1 at 0.7 MPa), which was two times larger than that of the original NF membrane. The modified NF membranes showed enhanced antifouling properties; this was mainly attributed to changes in the microstructures and surface features of the polyamide layer after the addition of the cMWNTs. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017, 134, 45268.Keywords
Funding Information
- National Natural Science Foundation of China (51403052)
This publication has 54 references indexed in Scilit:
- Effects of ordered mesoporous silica on the performances of composite nanofiltration membraneDesalination, 2013
- Preparation and characterization of thin-film nanocomposite membranes embedded with poly(methyl methacrylate) hydrophobic modified multiwalled carbon nanotubes by interfacial polymerizationJournal of Membrane Science, 2013
- Study on the modification of positively charged composite nanofiltration membrane by TiO2 nanoparticlesDesalination, 2013
- Enhanced thermal conductivity of nanofluids containing Ag/MWNT compositesPowder Technology, 2012
- Novel chitosan/poly(vinyl) alcohol thin adsorptive membranes modified with amino functionalized multi-walled carbon nanotubes for Cu(II) removal from water: Preparation, characterization, adsorption kinetics and thermodynamicsSeparation and Purification Technology, 2012
- Facile fabrication of superior nanofiltration membranes from interfacially polymerized CNT-polymer compositesJournal of Membrane Science, 2011
- Formation and structural evolution of biphenyl polyamide thin film on hollow fiber membrane during interfacial polymerizationJournal of Membrane Science, 2011
- Controllable disintegration of temperature-responsive self-assembled multilayer film based on polybetaineColloids and Surfaces A: Physicochemical and Engineering Aspects, 2011
- Preparation and characterization of PVDF microporous membrane with highly hydrophobic surfacePolymers for Advanced Technologies, 2011
- Polymer nanocomposites based on functionalized carbon nanotubesProgress in Polymer Science, 2010