Gadolinium Doped Ceria as Nickel–Free Fuel Electrode in High Temperature CO2‐Electrolysis
Open Access
- 21 February 2024
- journal article
- research article
- Published by Wiley in ChemElectroChem
- Vol. 11 (7)
Abstract
In this work, the performance, electrochemical processes, and stability of GDC (Ce0.8Gd0.2O1.9) fuel electrode containing single cells (GDC/8YSZ/GDC/LSCF) were examined in CO2 electrolysis conditions. The current density and area specific resistance is determined for different operation conditions. The examined cells showed a higher performance compared to state‐of‐the‐art Ni−YSZ fuel electrode (Ni‐YSZ/8YSZ/GDC/LSCF) based single cells with a similar production route. Furthermore, the cells were examined by means of electrochemical impedance spectroscopy (EIS) and the recorded data were evaluated by the distribution of relaxation times (DRT) analysis. An equivalent circuit model (ECM) consisting of four time constants and a Gerischer impedance (LR−RQ1−RQ2−G−RQ4−RQ5) was established to gain further insight into the individual processes in the cells. For instance, the low–frequency process P5 referring to RQ5 is the rate‐determining step in CO2 electrolysis and is assigned to a surface reaction including the charge transfer and possibly the gas diffusion in the GDC fuel electrode. A long–term stability test was performed in CO2 electrolysis conditions at 900 °C with a constant current load of −0.5 A ⋅ cm−2 for up to 1200 h. A degradation rate of 62 mV ⋅ kh−1 was observed. By EIS analysis, a similar contribution of the ohmic and polarization resistances to the degradation was determined. The low–frequency process P5 and thus the surface reaction including the charge transfer in the GDC fuel electrode is contributing most to the increase in polarization resistance. After the long–term stability test, scanning electron microscopy (SEM) analysis was carried out and a coarsening of GDC particles in the fuel electrode was observed.Keywords
Funding Information
- Bundesministerium für Forschung, Technologie und Raumfahrt (03SF0627A)
This publication has 67 references indexed in Scilit:
- Enhancing Electrochemical CO2 Reduction on Perovskite Oxide for Solid Oxide Electrolysis Cells through In Situ A‐Site Deficiencies and Surface Carbonate Deposition Induced by Lithium Cation Doping and ExsolutionSmall, 2023
- Ni migration in solid oxide cell electrodes: Review and revised hypothesisFuel Cells, 2021
- Modeling of the solid oxide fuel cell anode based on a new analytical model using nonlinear Butler-Volmer expressionIonics, 2021
- High‐Temperature CO2 Electrolysis in Solid Oxide Electrolysis Cells: Developments, Challenges, and ProspectsAdvanced Materials, 2019
- Self‐modification of Ni Metal Surfaces with CeO2 to Suppress Carbon Deposition at Solid Oxide Fuel Cell AnodesFuel Cells, 2017
- Evaluation of the Effect of Sulfur on the Performance of Nickel/Gadolinium‐Doped Ceria Based Solid Oxide Fuel Cell AnodesChemSusChem, 2016
- A Highly Efficient and Robust Nanofiber Cathode for Solid Oxide Fuel CellsAdvanced Energy Materials, 2016
- A Comparison of Oxygen-vacancy Effect on Activity Behaviors of Carbon Dioxide and Steam Reforming of Methane over Supported Nickel CatalystsCatalysis Letters, 2005
- Effect of steam and carbon dioxide pretreatments on methane decomposition and carbon gasification over doped-ceria supported nickel catalystCatalysis Letters, 2005
- Electrochemical Engineering1999