Decoupling Densification and Electronic Leakage in Fine-Grained Gd-doped Ceria (GDC) Electrolytes via Microstructural–Interfacial Co-Engineering

Authors:
  • ZZZhiyuan Zeng
    Zhiyuan Zeng
  • ZZZhuoyan Zan
    Zhuoyan Zan
  • YZYanling Zhou
    Yanling Zhou
  • XWXiaoqian Wang
    Xiaoqian Wang
  • JZJiabei Zhang
    Jiabei Zhang
  • DCDengjie Chen
    Dengjie Chen
  • CZChunliang Zhou
    Chunliang Zhou

Abstract
Gd-doped ceria (Gd0.2Ce0.8O1.9, GDC) electrolytes for intermediate-temperature solid oxide fuel cells (IT-SOFCs) face two intrinsically coupled challenges: the densification–grain coarsening trade-off during sintering, and detrimental electronic leakage arising from Ce4+ reduction under reducing atmospheres. Here, we present an integrated strategy that simultaneously addresses both limitations through two-step sintering (TSS) for microstructural control and sol-gel-derived ultrathin yttria stabilized zirconia (YSZ) electron-blocking layers for functional decoupling. TSS processing of nanocrystalline GDC powders (T1=1350 °C/0.5 h → T2=1250 °C/10 h) achieves near-full densification (relative density ~99%) while suppressing grain coarsening to 370 ± 151 nm, yielding a Vickers hardness of 11.75 GPa, ionic conductivity of 1.52×10−2 S·cm−1 at 600 °C, and a reduced activation energy of 0.59 eV. These improvements are attributed to enhanced grain-boundary homogeneity and suppressed dopant segregation via TSS. A crack-free, chemically compatible YSZ blocking layer (~1.22 μm) was subsequently deposited by spin-coating and co-sintered at 1200 °C, forming a well-bonded bilayer electrolyte with negligible interfacial ohmic penalty. This YSZ overlayer reduces the Ce3+ surface fraction from 14.70% to 9.20%, directly suppressing electronic conduction and increasing the open-circuit voltage (OCV) by 5.06% at 600 °C relative to single-layer GDC. The resulting electrolyte-supported single cell achieves a peak power density of 140 mW·cm−2 at 600 °C, an ~87% enhancement over the GDC baseline (75 mW·cm−2). This work establishes a transferable design framework for simultaneously engineering microstructure and suppressing electronic conduction in ceria-based electrolytes, advancing the viability of IT-SOFC applications.