Comparison of Wind Power Converter Reliability With Low-Speed and Medium-Speed Permanent-Magnet Synchronous Generators
Authors:
- Dao ZhouDZDao Zhou
- Frede BlaabjergFrede Blaabjerg
- Toke FrankeTFToke Franke
- Michael TonnesMTMichael Tonnes
- Mogens LauMLMogens Lau
Open Access
- 7 July 2015
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 62 (10) , 6575-6584
Abstract
More and more wind turbine manufacturers turn to using the full-scale power electronic converter due to the stricter grid code requirements to thoroughly decouple the generator from the grid connection. However, a commonly used type of this generator is still unclear, where the selections of the low-speed (LS; direct-drive) and medium-speed (MS; one-stage) permanent-magnet synchronous generators (PMSGs) are both promising solutions. This paper will assess and compare the reliability metrics for the machine-side converter (MSC) for those two configurations. First, a translation from the mission profile of the turbine to the current and voltage loading of each power semiconductor is achieved based on synchronous generator modeling. Afterward, a simplified approach to calculate the loss profile and the thermal profile is used to determine the most stressed power semiconductors in the converter. Finally, according to the lifetime power cycles, the lifespan can be calculated when operating in various wind classes. It is concluded that, although the LS PMSG is able to eliminate the gearbox, the lifespan of its MSC is lower than the one-stage MS generator.Keywords
This publication has 27 references indexed in Scilit:
- Thermal Loading and Lifetime Estimation for Power Device Considering Mission Profiles in Wind Power ConverterIEEE Transactions on Power Electronics, 2015
- Reduced Cost of Reactive Power in Doubly Fed Induction Generator Wind Turbine System With Optimized Grid FilterIEEE Transactions on Power Electronics, 2014
- Optimized Reactive Power Flow of DFIG Power Converters for Better Reliability Performance Considering Grid CodesIEEE Transactions on Industrial Electronics, 2014
- Thermal Cycling Overview of Multi-Megawatt Two-Level Wind Power Converter at Full Grid Code OperationIEEJ Journal of Industry Applications, 2013
- A prognostic approach for non-punch through and field stop IGBTsMicroelectronics Reliability, 2012
- An overview of the reliability prediction related aspects of high power IGBTs in wind power applicationsMicroelectronics Reliability, 2011
- A review of grid code technical requirements for wind farmsIET Renewable Power Generation, 2009
- Comparison of Direct-Drive and Geared Generator Concepts for Wind TurbinesIEEE Transactions on Energy Conversion, 2006
- Power cycling with high temperature swing of discrete components based on different technologies2004
- Relationship between space-vector modulation and three-phase carrier-based PWM: a comprehensive analysis [three-phase inverters]IEEE Transactions on Industrial Electronics, 2002