Development of a Method for Supervising Air and Reagent Flow Control During Copper-Sulfide Ore Flotation
Open Access
Abstract
The object of the study is the process of copper-sulfide ore flotation in a mechanical flotation machine. The problem of increasing the stability of the process with changing power characteristics and the limited information content of standard measuring channels was addressed. A method of supervisory control of air and flotation-reagent flow rates is proposed, combining technological parameters and visual characteristics of the froth layer. A two-channel dynamic model, a froth-state index and an algorithm for limited correction of the setpoints of local PID controllers were developed, taking into account the dead zone and amplitude and rate limits. A distinctive feature of the method is the verification of the reliability of video data and the transition to control based on technological parameters in the event of loss of the visual channel. The study is a simulation-based demonstration on a generic model of a flotation cell; no industrial data were used. The efficiency was evaluated in 50 simulation runs with stepwise, random, and combined disturbances, measurement noise, transport delays, and a temporary loss of the video signal. Compared with PID control at constant setpoints, the multimodal supervisor reduced the integral absolute error of the froth state by 66.5%, the error of the conditional (simulated) concentrate quality indicator by 48.1%, the integral squared error by 84.6%, and the standard deviations of these indicators by 49.1% and 22.3%, respectively. The reductions are relative to fixed-setpoint PID in simulation; acceptance criteria for production must be defined on industrial data. The effect is explained by the combined use of visual and technological feedback. The results were obtained by simulation; the method is designed to be integrated into a PLC–SCADA structure without replacing local circuits, and its industrial validation is the next step.Keywords
Funding Information
- Science Committee of the Ministry of Science and Higher Education of the Republic of Kazakhstan (BR28713037)
This publication has 35 references indexed in Scilit:
- Centralised economic model predictive control of froth flotation banks with experimental implementationChemical Engineering Research and Design, 2025
- Recent advances in flotation froth image analysis via deep learningEngineering Applications of Artificial Intelligence, 2025
- Artificial intelligence for enhanced flotation monitoring in the mining industry: A ConvLSTM-based approachComputers & Chemical Engineering, 2023
- Deep learning implementations in mining applications: a compact critical reviewArtificial Intelligence Review, 2023
- Economic model predictive control for a rougher froth flotation cell using physics-based modelsMinerals Engineering, 2023
- Deep learning feature-based setpoint generation and optimal control for flotation processesInformation Sciences, 2021
- A dynamic flotation model for predictive control incorporating froth physics. Part II: Model calibration and validationMinerals Engineering, 2021
- A dynamic flotation model for predictive control incorporating froth physics. Part I: Model developmentMinerals Engineering, 2021
- A dynamic flotation model to infer process characteristics from online measurementsMinerals Engineering, 2021
- Modelling for froth flotation control: A reviewMinerals Engineering, 2021