Research on the Microstructures and Mechanical Properties of Bainite/Martensite Rail Treated by the Controlled-Cooling Process
Open Access
- 20 September 2019
- Vol. 12 (19) , 3061
Abstract
A bainite/martensite multiphase rail is treated by the controlled-cooling process with different finish-cooling temperatures. The simulated temperature–time curves of the position of 5 mm and 15 mm below the rail tread (P5 and P15) express different trends. P5 has greater impact toughness and lower tensile strength than P15. Microstructural characterization was carried out by conducting scanning electron microscopy, X-ray diffraction, electron backscatter diffraction, and transmission electron microscopy. The greater tensile strength is due to the dispersed ε-carbides hindering the movement of dislocations. The greater impact toughness is attributed to the filmy retained austenite and the smaller effective grain with high-angle boundary. Finite element modeling (FEM) and microstructural characterization reasonably explain the changes of mechanical properties. The present work provides experimental and theoretical guidance for the development of rail with excellent mechanical properties.Keywords
Funding Information
- National Key Research and Development Program of China (2017YFB0304504)
- Fund of Key Laboratory of Advanced Materials of Ministry of Education (XJCL201908)
- National Basic Research Program of China (973 Program) (2015CB654804)
This publication has 28 references indexed in Scilit:
- Hydrogen embrittlement behavior of high strength bainitic rail steel: Effect of tempering treatmentEngineering Failure Analysis, 2018
- Modelling and optimization of the manufacturing chain for railsProcedia Engineering, 2017
- Ultrahigh strength-toughness combination in Bainitic rail steel: The determining role of austenite stability during temperingMaterials Science and Engineering: A, 2016
- Numerical Simulation Analysis of H-Beam Steel Controlled CoolingApplied Mechanics and Materials, 2013
- Surface Temperature Change of U75V 60 kg/m Heavy Rail During Heat TreatmentJournal of Iron and Steel Research International, 2013
- Very high cycle fatigue behaviors of Mn–Si–Cr series Bainite/Martensite dual phase steelsMaterials & Design (1980-2015), 2010
- Effects of hydrogen on the properties of bainitic steel crossingEngineering Failure Analysis, 2009
- Effect of Controlled Cooling After Hot Rolling on Mechanical Properties of Hot Rolled TRIP SteelJournal of Iron and Steel Research International, 2008
- Mechanical and fracture behavior of bainitic rail steelJournal of Materials Processing Technology, 2004
- Microstructure and mechanical properties of as rolled high strength bainitic rail steelsMaterials Science and Technology, 2001