Enhancing fixation strength in periprosthetic femur fractures by orthogonal plating—A biomechanical study
Authors:
- 29 October 2015
- journal article
- research article
- Published by Wiley in Journal of Orthopaedic Research
- Vol. 34 (4) , 591-596
Abstract
Orthogonal plate osteosynthesis enhances fixation stability in periprosthetic femur fractures. Another option are locking attachment plates (LAP) allowing bicortical locking screw placement lateral to the prosthesis stem. Stability of lateral plate osteosynthesis with two LAP (2LAP) was compared to anterolateral orthogonal plate osteosynthesis (OP) with one LAP in a periprosthetic femur fracture model. In six pairs of fresh frozen human femora with cemented Charnley hip prosthesis, a transverse osteotomy was set distal to the tip of the prosthesis simulating a Vancouver type B1 fracture. Each pair was instrumented using a plate tensioner with either one lateral plate and two LAP, or two orthogonal anterolateral plates and one LAP. Stiffness was determined in a four‐point‐bending test prior to cyclic testing (2Hz) with physiologic profile and progressively increasing load up to catastrophic construct failure. Paired t‐test and Wilcoxon‐signed‐rank test were used for statistical evaluation at a level of significance p = 0.05. The OP construct exhibited a significantly higher number of cycles and load to failure (39,627 cycles ± 4,056; 4,463 N ± 906) compared to the 2LAP construct (32,927 cycles ± 3,487; 3,793 N ± 849), p < 0.01. Mediolateral bending and torsional stiffness of the OP (1610 N/mm ± 249; 16.9 Nm/mm ± 6.3) were significantly higher compared to 2 LAP (1077 N/mm ± 189; 12.1 Nm/mm ± 3.9), p = 0.03 for both comparisons. Orthogonal plate osteosynthesis is a valuable option in periprosthetic fracture surgery, offering increased stability compared to a single lateral plate fixed with two LAP. © 2015 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 34:591–596, 2016.Keywords
Funding Information
- Alexander Foundation for Orthodontic Research and Education
This publication has 23 references indexed in Scilit:
- Periprosthetic Femoral Fracture — A Biomechanical Comparison Between Vancouver Type B1 and B2 Fixation MethodsThe Journal of Arthroplasty, 2014
- Minimally invasive fixation of type B and C interprosthetic femoral fracturesOrthopaedics & Traumatology: Surgery & Research, 2013
- The Effect of Fixation Technique on the Stiffness of Comminuted Vancouver B1 Periprosthetic Femur FracturesThe Journal of Arthroplasty, 2010
- The biomechanical analysis of three plating fixation systems for periprosthetic femoral fracture near the tip of a total hip arthroplastyJournal of Orthopaedic Surgery and Research, 2010
- An algorithm for the surgical treatment of periprosthetic fractures of the femur around a well-fixed femoral componentThe Journal of Bone and Joint Surgery. British volume, 2009
- Quantification of cancellous bone-compaction due to DHS® Blade insertion and influence upon cut-out resistanceClinical Biomechanics, 2009
- Cyclic Loading of Periprosthetic Fracture Fixation ConstructsJournal of Trauma: Injury, Infection & Critical Care, 2008
- Fixation of long bone segmental defects: A biomechanical studyInjury, 2008
- Mechanical analysis of the bone to plate interface of the LC-DCP and of the PC-FIX on human femoraInjury, 2000
- In vivo Messung der Hüftgelenkbelastung 1. Teil: KrankengymnastikZeitschrift für Orthopädie und ihre Grenzgebiete, 1989