Nature of CoCrFeMnNi/Fe and CoCrFeMnNi/Al Solid/Solid Interface
Authors:
Open Access
- 10 October 2021
- journal article
- research article
- Published by Elsevier in Acta Metallurgica Sinica (English Letters)
- Vol. 34 (11) , 1483-1491
Abstract
To shed light into the application potential of high-entropy alloys as “interlayer” materials for Al-steel solid-state joining, we investigated the nature of the CoCrFeMnNi/Fe and CoCrFeMnNi/Al solid/solid interfaces, focusing on the bonding behavior and phase components. Good metallurgical bonding without the formation of hard and brittle IMC can be achieved for CoCrFeMnNi/Fe solid/solid interface. In contrast to the formation of Al 5 Fe 2 phase at the Fe/Al interface, Al 13 Fe 4 -type IMC, in which the Fe site is co-occupied equally by Co, Cr, Fe, Mn and Ni, dominates the CoCrFeMnNi/Al interface. Although the formation of IMC at the CoCrFeMnNi/Al interface is not avoidable, the thickness and hardness of the Al 13 (CoCrFeMnNi) 4 phase formed at the CoCrFeMnNi/Al interface are significantly lower than the Al 5 Fe 2 phase formed at the Fe/Al interface. The activation energies for the interdiffusion of Fe/Al and CoCrFeMnNi/Al static diffusion couple are 341.6 kJ/mol and 329.5 kJ/mol, respectively. Despite this similarity, under identical static annealing condition, the interdiffusion coefficient of the CoCrFeMnNi/Al diffusion couple is significantly lower than that of the Fe/Al diffusion couple. This is thus mainly a result of the reduced atomic mobility/diffusivity caused by the compositional complexity in CoCrFeMnNi high-entropy alloy.Keywords
This publication has 55 references indexed in Scilit:
- Exploration and Development of High Entropy Alloys for Structural ApplicationsEntropy, 2014
- Partitioning evaluation of mechanical properties and the interfacial microstructure in a friction stir welded aluminum alloy/stainless steel lap jointScripta Materialia, 2012
- On the formation and growth of intermetallic phases during interdiffusion between low-carbon steel and aluminum alloysActa Materialia, 2011
- Intermetallic compounds in Al 6016/IF-steel friction stir spot weldsMaterials Science and Engineering: A, 2010
- Growth behavior of Fe2Al5 during reactive diffusion between Fe and Al at solid-state temperaturesMaterials Science and Engineering: A, 2007
- Interfacial reaction in steel–aluminum joints made by friction stir weldingScripta Materialia, 2006
- Reactive diffusion in the roll bonded iron–aluminum systemMaterials Letters, 2006
- Classification of Bulk Metallic Glasses by Atomic Size Difference, Heat of Mixing and Period of Constituent Elements and Its Application to Characterization of the Main Alloying ElementMATERIALS TRANSACTIONS, 2005
- Nanostructured High‐Entropy Alloys with Multiple Principal Elements: Novel Alloy Design Concepts and OutcomesAdvanced Engineering Materials, 2004
- Impurity Diffusion of Manganese in AluminumMaterials Science Forum, 1987