Corrosion Product Film of a Medium-Mn Steel Exposed to Simulated Marine Splash Zone Environment
Open Access
- 28 September 2021
- Vol. 14 (19) , 5652
Abstract
The corrosion behavior of a medium-Mn steel in a simulated marine splash zone was studied by a dry–wet cyclic corrosion experiment and electrochemical experiment. The corrosion products were characterized by corrosion rate calculation, composition detection, morphology observation, element distribution detection, valence analysis, polarization curve, and electrochemical impedance test. The results show that the corrosion products of the sample mainly include γ-FeOOH, FexOy, MnxOy, and a small amount of (Fe,Mn)xOy, and the valence state of iron compounds and manganese compounds in different corrosion stages changed obviously. In the initial corrosion products, Mn is enriched significantly and facilitates the electrochemical reaction of corrosion process. The content of Ni in the inner rust layer is high. The semi-quantitative analysis of the corrosion product elements shows that the atomic concentrations of Cr and Mo increase significantly in later corrosion products, indicating that the dense isolation layer formed by alloy element compounds in the corroded layer is the main factor to improve the protection ability of the rust layer at the end corrosion stage of the sample. With the corrosion durations, the corrosion current density of the sample with the corrosion product film first increases and then decreases, and the corrosion potential first moves negative and then shifts in a positive direction subsequently, indicating that the protective effect of the corrosion product film is gradually significant.Keywords
Funding Information
- National Natural Science Foundation of China (52074149)
- the National Natural Fund Joint Project (U1860112)
- State Key Laboratory of Metal Materials for Marine Equipment and Applications Fund Joint Project (HGSKL-USTLN(2021)02)
- the Liaoning Provincial Education Department Project (2020 LNZD07)
This publication has 34 references indexed in Scilit:
- Influence of anions on the formation of artificial steel rust particles prepared from acidic aqueous Fe(III) solutionCorrosion Science, 2013
- Evolution of corrosion of MnCuP weathering steel submitted to wet/dry cyclic tests in a simulated coastal atmosphereCorrosion Science, 2012
- Lean duplex stainless steels—The role of molybdenum in pitting corrosion of concrete reinforcement studied with industrial and laboratory castingsMaterials Chemistry and Physics, 2012
- A study of the evolution of rust on Mo–Cu-bearing fire-resistant steel submitted to simulated atmospheric corrosionCorrosion Science, 2012
- Corrosion of vertical mild steel strips in seawaterCorrosion Science, 2009
- Role of climatic conditions on corrosion characteristics of structural steelsCorrosion Science, 2008
- Composition and protective ability of rust layer formed on weathering steel exposed to various environmentsCorrosion Science, 2006
- Advances in understanding atmospheric corrosion of iron. I. Rust characterisation of ancient ferrous artefacts exposed to indoor atmospheric corrosionCorrosion Science, 2004
- Clarification of chemical state for alloying elements in iron rust using a binary-phase potential–pH diagram and physical analysesCorrosion Science, 2003
- Study on the corrosion peak of carbon steel in marine splash zoneChinese Journal of Oceanology and Limnology, 1997