Numerical Simulation of Physical Field During Different Ultrasonic‐Power‐Assisted Casting of 7085 Aluminum Alloy
Authors:
- 27 May 2024
- journal article
- research article
- Published by Wiley in Advanced Engineering Materials
- Vol. 26 (13)
Abstract
High‐energy ultrasound has the effect of purifying the aluminum (Al) melt and improving the uniformity of temperature and flow field distribution. In this article, a finite‐element numerical model of ultrasonic‐assisted casting of 7085 Al alloy melt is established, and the changes of acoustic pressure field, temperature field, and flow field in the solidification process of alloy melt with different ultrasonic power are investigated. In the numerical simulation results, it is shown that the thickness of the 7085 Al melt mushy zone decreases by 89, 97, 108, 114, and 99 mm, respectively, compared without ultrasonic (WNU) when the ultrasonic power is 150, 350, 550, 750, and 950 W. The area of the alloy mushy zone increases by 38.1%, 43.5%, 61.0%, 206.5%, and 45.6%, respectively. According to numerical simulation results, when the ultrasonic power is 750 W, it has the best effect on improving the macroscopic physical field, increasing the mass and heat‐transfer rate in the center of the Al melt. Meanwhile, the experimental results of industrial melting and casting of 7085 large‐scale Al alloy ingots are basically consistent with the numerical simulation, which provide technical support for ultrasonic‐assisted fabrication of large‐scale 7085 Al alloy ingots.Keywords
This publication has 43 references indexed in Scilit:
- Evolutions of Microstructure and Mechanical Properties of Cryorolled 7085 Al Alloy After Annealing TreatmentsJOM, 2023
- Numerical Prediction of Channel-Type Segregation Formation in DC Casting of Al–Mg BilletMetallurgical and Materials Transactions B, 2021
- Flow Behavior and Microstructure Characterization of 7085 Aluminum Alloy Under Various Deformation ConditionsMetallurgical and Materials Transactions A, 2021
- Scalable Ultrasound-Assisted Casting of Ultra-large 2219 Al Alloy IngotsMetallurgical and Materials Transactions A, 2019
- A Simplified Three-Phase Model of Equiaxed Solidification for the Prediction of Microstructure and Macrosegregation in CastingsMetallurgical and Materials Transactions A, 2018
- Review of Grain Refinement of Cast Metals Through Inoculation: Theories and DevelopmentsMetallurgical and Materials Transactions A, 2017
- Modeling of the Coupling of Microstructure and Macrosegregation in a Direct Chill Cast Al-Cu BilletMetallurgical and Materials Transactions A, 2017
- A Simple Model of the Mold Boundary Condition in Direct-Chill (DC) Casting of Aluminum AlloysMetallurgical and Materials Transactions B, 2012
- Theoretical prediction of cavitational activity distribution in sonochemical reactorsChemical Engineering Journal, 2010
- Characterization of the flow in the molten metal sump during direct chill aluminum castingMetallurgical and Materials Transactions B, 1997