Prediction of seam strength of superimposed and lapped seams on plain woven cotton fabric using artificial neural network
Open Access
- 15 June 2026
- journal article
- Published by SAGE Publications in Journal of Engineered Fibers and Fabrics
- Vol. 21
Abstract
The strength of the seam is one of the most important factors in determining the garment’s durability, structural soundness, and useful life. Conventional experimental-based assessment techniques are robust, but ineffective in cases where different sewing parameters interact non-linearly. This work is focused on the formulation and validation of an Artificial Neural Network (ANN) model for predicting seam strength associated with superimposed and lapped seams under different sewing conditions. These seam classes are commonly used in woven apparel products such as shirts, trousers, denim garments, sportswear, and workwear, where seam durability and structural integrity are important performance requirements. 60 samples of seam were prepared from plain cotton fabrics. Five sewing thread linear densities (21-59 tex), six stitch densities (5-11 SPI), and two seam classes were systematically used in combination. The seam strength according to ASTM D 1683-04 was tested with a calibrated Universal Testing Machine. A feed-forward ANN with one hidden layer was implemented in MATLAB and trained using the Levenberg-Marquardt backpropagation algorithm. The performance of the model was assessed using mean square error (MSE), root mean square error (RMSE), mean absolute percentage error (MAPE), and correlation coefficient. For training, validation, testing, and independent datasets, the ANN exhibited very good prediction capability with correlation coefficients greater than 0.99. Independent verification exhibited an RMSE of 2.38 N and a MAPE of 6.96%, indicating improved prediction accuracy compared to earlier ANN-based seam strength models with an approximately 15-30% lower prediction error. The model was successful in capturing the non-linear relationships between stitch density, thread linear density, and seam geometry. The developed model may assist garment manufacturers and textile engineers in rapid sewing parameter selection, reduction of trial-and-error, minimization of material wastage, and optimization of seam quality during apparel product development.Keywords
This publication has 24 references indexed in Scilit:
- The parameters affecting seam quality: a comprehensive reviewResearch Journal of Textile and Apparel, 2021
- Comparison of ANFIS and ANN modeling for predicting the water absorption behavior of polyurethane treated polyester fabricHeliyon, 2021
- Prediction of yarn crimp in PES multifilament woven barrier fabrics using artificial neural networkThe Journal of the Textile Institute, 2017
- Predicting the colour properties of viscose knitted fabrics using soft computing approachesThe Journal of the Textile Institute, 2017
- Modeling of needle penetration force in denim fabricInternational Journal of Clothing Science and Technology, 2013
- Modelling the woven fabric strength using artificial neural network and Taguchi methodologiesInternational Journal of Clothing Science and Technology, 2008
- Application of artificial neural networks to the prediction of sewing performance of fabricsInternational Journal of Clothing Science and Technology, 2007
- Prediction of the air permeability of woven fabrics using neural networksInternational Journal of Clothing Science and Technology, 2007
- Basic concepts of artificial neural network (ANN) modeling and its application in pharmaceutical researchJournal of Pharmaceutical and Biomedical Analysis, 2000
- 31—SOME ASPECTS OF THE MECHANISM OF SEAM SLIPPAGE IN WOVEN FABRICSThe Journal of the Textile Institute, 1985