In situ Semi-Quantitative Analysis of Polluted Soils by Laser-Induced Breakdown Spectroscopy (LIBS)
Authors:
- 1 May 2011
- journal article
- research article
- Published by SAGE Publications in Applied Spectroscopy
- Vol. 65 (5) , 467-473
Abstract
Time-saving, low-cost analyses of soil contamination are required to ensure fast and efficient pollution removal and remedial operations. In this work, laser-induced breakdown spectroscopy (LIBS) has been successfully applied to in situ analyses of polluted soils, providing direct semi-quantitative information about the extent of pollution. A field campaign has been carried out in Brittany (France) on a site presenting high levels of heavy metal concentrations. Results on iron as a major component as well as on lead and copper as minor components are reported. Soil samples were dried and prepared as pressed pellets to minimize the effects of moisture and density on the results. LIBS analyses were performed with a Nd:YAG laser operating at 1064 nm, 60 mJ per 10 ns pulse, at a repetition rate of 10 Hz with a diameter of 500 μm on the sample surface. Good correlations were obtained between the LIBS signals and the values of concentrations deduced from inductively coupled plasma atomic emission spectroscopy (ICP-AES). This result proves that LIBS is an efficient method for optimizing sampling operations. Indeed, “LIBS maps” were established directly on-site, providing valuable assistance in optimizing the selection of the most relevant samples for future expensive and time-consuming laboratory analysis and avoiding useless analyses of very similar samples. Finally, it is emphasized that in situ LIBS is not described here as an alternative quantitative analytical method to the usual laboratory measurements but simply as an efficient time-saving tool to optimize sampling operations and to drastically reduce the number of soil samples to be analyzed, thus reducing costs. The detection limits of 200 ppm for lead and 80 ppm for copper reported here are compatible with the thresholds of toxicity; thus, this in situ LIBS campaign was fully validated for these two elements. Consequently, further experiments are planned to extend this study to other chemical elements and other matrices of soils.Keywords
This publication has 28 references indexed in Scilit:
- Heavy metal concentrations in soils as determined by laser-induced breakdown spectroscopy (LIBS), with special emphasis on chromiumEnvironmental Research, 2009
- On-line monitoring of remediation process of chromium polluted soil using LIBSJournal of Hazardous Materials, 2009
- Real time and in situ determination of lead in road sediments using a man-portable laser-induced breakdown spectroscopy analyzerAnalytica Chimica Acta, 2009
- Towards quantitative laser-induced breakdown spectroscopy analysis of soil samplesSpectrochimica Acta Part B: Atomic Spectroscopy, 2007
- Identification and mapping of heavy metal pollution in soils of a sports ground in Galway City, Ireland, using a portable XRF analyser and GISEnvironmental Geochemistry and Health, 2007
- Monitoring and assessment of toxic metals in Gulf War oil spill contaminated soil using laser-induced breakdown spectroscopyEnvironmental Monitoring and Assessment, 2007
- Scope of Future Development in LIBS2007
- Laser-induced breakdown spectroscopy – An emerging chemical sensor technology for real-time field-portable, geochemical, mineralogical, and environmental applicationsApplied Geochemistry, 2006
- Handbook of Laser‐Induced Breakdown Spectroscopy2006
- Qualitative and quantitative investigation of chromium-polluted soils by laser-induced breakdown spectroscopy combined with neural networks analysisAnalytical and Bioanalytical Chemistry, 2006