Efficient Separation and Purification Method for Recovering Valuable Elements from Bismuth Telluride Refrigeration Chip Waste
Open Access
- 10 October 2023
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 8 (42) , 39222-39232
Abstract
Bismuth telluride and its alloys are widely utilized in thermoelectric refrigeration and power generation devices. Waste bismuth telluride-based cooling chips contain valuable elements; however, recycling processes for these materials remain underdeveloped due to their complexity. In this study, we developed a concise and efficient chemical method that does not require expensive reagents or equipment, enabling the separation and purification of tellurium, bismuth, selenium, and antimony from waste bismuth telluride-based cooling chips. Initially, the waste was leached with HCl and NaClO3 to dissolve primary elements and recover 99.9% of selenium using hydroxylamine hydrochloride. Subsequently, Na2S and NaOH were employed for precipitation and leaching, resulting in a solution containing tellurium. The precipitated residue was treated with HNO3 to oxidize antimony into insoluble SbOHN and dissolve bismuth completely. 99.8% of the bismuth telluride waste was dissolved via oxidative leaching through hydrolysis. A small amount of sodium sulfide reduced the precipitation percentage of tellurium from 11.9% to 7.5% in an alkaline solution, and the direct recovery percentage of tellurium in the form of TeO2 exceeded 90%, while the purity of TeO2 reached 99.9%. By adjusting the pH of the bismuth solution to 0.15, 98.9% of the bismuth was able to precipitate and be recovered as BiOCl, with the purity also reaching 99.9%. In summary, this study presents an efficient hydrometallurgical method for treating bismuth telluride waste and provides theoretical guidance for reagent dosage, demonstrating the significant potential for industrial applications.Keywords
Funding Information
- Chongqing Municipal Science and Technology Bureau (2019-YF05-01836-SN, 2021-YF05-00482-SN)
- Sichuan University (2019CDPZH-2)
- Fundamental Research Funds for the Central Universities (2018SCUH0025)
- Sichuan Province (2022YFH0039)
- Panzhihua City (2019CDPZH-2)
This publication has 30 references indexed in Scilit:
- Selection of reductants for extracting selenium and tellurium from degoldized solution of copper anode slimesTransactions of Nonferrous Metals Society of China, 2017
- Theoretical simulation and experimental study of hydrolysis separation of SbCl3 in complexation–precipitation systemTransactions of Nonferrous Metals Society of China, 2016
- Precious metals recovery from waste printed circuit boards: A review for current status and perspectiveResources, Conservation and Recycling, 2016
- Recovery of antimony compounds from alkaline sulphide leachatesInternational Journal of Mineral Processing, 2016
- Recovery of tellurium from high tellurium-bearing materials by alkaline pressure leaching process: Thermodynamic evaluation and experimental studyHydrometallurgy, 2013
- The influence of CNTs on the thermoelectric properties of a CNT/Bi2Te3 compositeCarbon, 2013
- Preparation of high pure tellurium from raw tellurium containing Cu and Se by chemical methodTransactions of Nonferrous Metals Society of China, 2011
- Arsenic, Antimony, and Bismuth Production2001
- Tellurium recovery from cemented tellurium with minimum waste disposalHydrometallurgy, 1999
- Chemical bonding in bismuth tellurideJournal of Physics and Chemistry of Solids, 1958