Heat Transfer Analysis of Flat Heat Pipe With Enhanced Microchannel Shape
Open Access
- 30 August 2021
- journal article
- research article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 9, 120833-120843
Abstract
Flat heat pipe has many excellent characteristics such as high thermal conductivity, reversibility of heat flow direction and so on. In this paper, a flat heat pipe model with multiple microchannels is established, and the effects of different microchannel shapes and different materials on the heat transfer efficiency of flat heat pipe are studied. Then, based on the general rectangular and inverted trapezoidal microchannel shape, the enhancement is carried out. That is to fill a number of materials in the bottom of the microchannel to change the bottom shape of the microchannel. In the steady-state thermal simulation of flat heat pipe, the axial temperature of the flat heat pipe with enhanced microchannel shape is lower than that of the flat heat pipe with general microchannel, which shows that the enhanced microchannel shape is helpful to the heat dissipation of flat heat pipe. The fluid simulation results show that the enhanced rectangular microchannel shape can accelerate the flow velocity of working fluid. Therefore, the flat heat pipe with enhanced microchannel shape has better heat transfer performance. In order to obtain the local temperature of flat heat pipe quickly, the transient analytical solution is provided. In this paper, the temperature field calculated by using transient analytical solution is compared with that simulated by COMSOL. The results show that the maximum error between the results of discrete heat source model and continuous heat source model calculated by transient solution and COMSOL simulation results is less than 2%.Keywords
Funding Information
- Guangzhou Science and Technology Project (201904010107)
- Guangdong Provincial Natural Science Foundation of China (2019A1515010793)
- Guangdong Province Science and Technology Project (2016B090918071)
This publication has 31 references indexed in Scilit:
- Experimental study on a novel flat-heat-pipe heating system integrated with phase change material and thermoelectric unitEnergy, 2019
- Experimental study on thermal performance of copper nanofluids in a miniature heat pipe fabricated by wire electrical discharge machiningApplied Thermal Engineering, 2019
- Novel Production and Performance of Aluminum-Based Ultrathin Flat Heat Pipes Based on Preforming and Multi-Tooth PlowingIEEE Transactions on Components, Packaging and Manufacturing Technology, 2019
- Transient Thermal Behavior of a Neon Pulsating Heat Pipe (PHP)IEEE Transactions on Applied Superconductivity, 2019
- Thermal performance analysis of a flat heat pipe working with carbon nanotube-water nanofluid for cooling of a high heat flux heaterHeat and Mass Transfer, 2017
- Role of nanofluid fouling on thermal performance of a thermosyphon: Are nanofluids reliable working fluid?Applied Thermal Engineering, 2015
- Evaporative Heat Transfer Analysis of a Heat Pipe With Hybrid Axial GrooveJournal of Heat Transfer, 2013
- Effect of Nanofluid on Flat Heat Pipe Thermal Performance2008
- Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surfaceInternational Journal of Multiphase Flow, 2007
- Experimental Investigation of Micro Heat Pipes Fabricated in Silicon WafersJournal of Heat Transfer, 1993