Effects of the Use of Pore Formers on Performance of an Anode Supported Solid Oxide Fuel Cell
- 1 March 2005
- journal article
- Published by Wiley in Journal of the American Ceramic Society
- Vol. 88 (3) , 513-518
Abstract
The effects of amount of pore former used to produce porosity in the anode of an anode supported planar solid oxide fuel cell were examined. The pore‐forming material utilized was rice starch. The reduction rate of the anode material was measured by Thermogravimetric analysis to qualitatively characterize the gas transport within the porous anode materials. Fuel cells with varying amounts of porosity produced by using rice starch as a pore former were tested. The performance of the fuel cell was the greatest with an optimum amount of pore former used to create porosity in the anode. This optimum is believed to be related to a trade off between increasing gas diffusion to the active three‐phase boundary region of the anode and the loss of performance because of the replacement of active three‐phase boundary regions of the anode with porosity.Keywords
This publication has 10 references indexed in Scilit:
- Engineered Porosity via Tape Casting, Lamination and the Percolation of Pyrolyzable ParticulatesJournal of the American Ceramic Society, 1999
- Polarization Effects in Intermediate Temperature, Anode‐Supported Solid Oxide Fuel CellsJournal of the Electrochemical Society, 1999
- Porous Materials1998
- Electrode supported solid oxide fuel cells: Electrolyte films prepared by DC magnetron sputteringSolid State Ionics, 1997
- Material characterization in support of the development of an anode substrate for solid oxide fuel cellsJournal of Materials Research, 1997
- Oxidation mechanism and effective anode thickness of SOFC for dry methane fuelSolid State Ionics, 1996
- High Performance Catalyzed‐Reaction Layer for Medium Temperature Operating Solid Oxide Fuel CellsJournal of the Electrochemical Society, 1994
- Ceramic Fuel CellsJournal of the American Ceramic Society, 1993
- The kinetics of nickel oxide reduction by hydrogen; Measurements in a fluidized bed and in a gravimetric apparatusMetallurgical and Materials Transactions B, 1976
- Cathode Materials and Performance in High-Temperature Zirconia Electrolyte Fuel CellsJournal of the Electrochemical Society, 1969