Effect of Wear on the Vibrating Behaviour of the Tool at Turning CW724R Alloy
Authors:
- 20 July 2022
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 51-55
Abstract
The development of new materials and technologies also significantly affects traditional methods of component production, as it forces companies to increase the efficiency of the production process and thus remain competitive. This pressure also brings new challenges in the field of machining. The article deals with the influence of wear on the vibration behaviour of the tool when turning CW724R alloy. The aim of the research is to know the frequency response of the system to different sizes of tool wear, which causes deterioration of the quality of machined parts and instability of the entire cutting process. A specific method of artificial wear of cutting tool was applied to determine the vibration behaviour of a worn tool. To reduce the number of experimental measurements, the methodology of the orthogonal non-rotating composition plan was chosen. The matrix of two independent variables (cutting speed versus artificial wear) was selected to evaluate the relationships between them under conditions of the constant depth of cut and feed, which was processed by the multiple linear regression methodology. Finally, a dependence of vibrations on cutting speed and wear rate for evaluated material was plotted in a spatial graph.Keywords
Funding Information
- Ministry of Education
This publication has 18 references indexed in Scilit:
- The Parameter Correlation of Acoustic Emission and High-Frequency Vibrations in the Assessment Process of the Operating State of the Technical SystemActa Mechanica et Automatica, 2016
- Tool wear predictability estimation in milling based on multi-sensorial dataThe International Journal of Advanced Manufacturing Technology, 2015
- Investigation of wear and tool life of coated carbide and cubic boron nitride cutting tools in high speed millingAdvances in Mechanical Engineering, 2015
- Determination of Cutting Forces in Oblique CuttingApplied Mechanics and Materials, 2015
- Machining and Machining Modeling of Metal Matrix Composites—A Review2015
- Increasing of the Cutting Tool Efficiency from Tool Steel by Using Fluidization MethodProcedia Engineering, 2015
- Comparative study of the parameters influencing the machinability of leaded brassesEngineering Failure Analysis, 2010
- Leaded Brass Rods C 38500 for Automating Machining Operations: A Technical ReportJournal of Materials Engineering and Performance, 2002
- A Review of the Machinability of Copper-Base AlloysCanadian Metallurgical Quarterly, 1996
- The effect of lead on the friction and machining of brassPhilosophical Magazine A, 1981