Analysis of Precooling Injection Transient of Steam Generator for High Temperature Gas Cooled Reactor
Open Access
- 27 July 2017
- journal article
- research article
- Published by Wiley in Science and Technology of Nuclear Installations
- Vol. 2017, 1-8
Abstract
After a postulated design basis accident leads high temperature gas cooled reactor to emergency shutdown, steam generator still remains with high temperature level and needs to be cooled down by a precooling before reactor restarts with clearing of fault. For the large difference of coolant temperature between inlet and outlet of steam generator in normal operation, the temperature distribution on the components of steam generator is very complicated. Therefore, the temperature descending rate of the components in steam generator needs to be limited to avoid the potential damage during the precooling stage. In this paper, a pebble-bed high temperature gas cooled reactor is modeled by thermal-hydraulic system analysis code and several postulated precooling injection transients are simulated and compared to evaluate their effects, which will provide support for the precooling design. The analysis results show that enough precooling injection is necessary to satisfy the precooling requirements, and larger mass flow rate of precooling water injection will accelerate the precooling process. The temperature decrease of steam generator is related to the precooling injection scenarios, and the maximal mass flow rate of the precooling injection should be limited to avoid the excessively quick temperature change of the structures in steam generator.Keywords
Funding Information
- National Science and Technology Major Project (ZX06908, 863, 2014AA052701)
- National High Technology Research and Development Program of China (ZX06908, 863, 2014AA052701)
- National High Technology Research and Development Program of China (ZX06908, 863, 2014AA052701)
This publication has 7 references indexed in Scilit:
- The Shandong Shidao Bay 200 MWe High-Temperature Gas-Cooled Reactor Pebble-Bed Module (HTR-PM) Demonstration Power Plant: An Engineering and Technological InnovationEngineering, 2016
- Status of the very high temperature reactor systemProgress in Nuclear Energy, 2014
- Study on pressure relief system design for high temperature gas cooled reactorProgress in Nuclear Energy, 2014
- Design aspects of the Chinese modular high-temperature gas-cooled reactor HTR-PMNuclear Engineering and Design, 2006
- Overview of the 10 MW high temperature gas cooled reactor—test module projectNuclear Engineering and Design, 2002
- A Personal Computer-Based Simulator for Nuclear-Heating ReactorsNuclear Technology, 2000
- Technical design features and essential safety-related properties of the HTR-moduleNuclear Engineering and Design, 1990