Catalytic characteristics of titanium‐(IV)‐isopropoxide (TTIP) on de/re‐hydrogenation of wet ball‐milled MgH2/Mg
- 1 August 2022
- journal article
- research article
- Published by Wiley in International Journal of Energy Research
- Vol. 46 (12) , 17602-17615
Abstract
Summary: Magnesium hydride (MgH2) has received much attention as a solid‐state hydrogen storage material worldwide due to its high hydrogen storage capacity, good reversibility, and low cost. However, its practical application has been limited due to its high thermodynamic stability and slow kinetics. In the present work, we have employed a new type of catalyst, Titanium‐tetra‐isopropoxide (TTIP) (Ti(OC3H7)4), to catalyze MgH2. To disperse the catalyst evenly over the MgH2, the milling operation was conducted using tetrahydrofuran (THF) as a process control agent. Here, using THF as the process control agent during the wet ball milling along with TTIP of MgH2 itself used to improve the de/re‐hydrogenation behavior of MgH2. A de/re‐hydrogenation investigation demonstrates that MgH2 catalyzed by TTIP has better hydrogen storage properties (onset dehydrogenation temperature 210°C) than as‐cast MgH2 (onset dehydrogenation temperature ~400°C). Furthermore, a remarkable catalytic behavior of TTIP on MgH2 was observed during de‐/re‐hydrogenation kinetics (absorb the hydrogen ~4.6 wt% within the 1.5 minutes at a temperature of 300°C under a hydrogen pressure of 20 atm and release the hydrogen of ∼4.98 wt% within 5 minutes at ∼300°C) due to formation of intermediate compound Mg1−xTixO, and it retains nearly constant hydrogen storage capacity (from 5.25 to 5.20 wt% in rehydrogenation and from 4.95 wt % to 4.95 wt% in dehydrogenation) up to 60 cycles of de/re‐hydrogenation. The estimated desorption activation energy for MgH2‐TTIP using Arrhenius equation is 77.67 kJ/mol. The reason for de/re‐hydrogenation kinetics improvement of MgH2‐TTIP can be seen in the mechanism.Keywords
This publication has 67 references indexed in Scilit:
- Determination of kinetic parameters and hydrogen desorption characteristics of MgH2-10 wt% (9Ni–2Mg–Y) nano-compositeInternational Journal of Hydrogen Energy, 2013
- Effects of nano size mischmetal and its oxide on improving the hydrogen sorption behaviour of MgH2International Journal of Hydrogen Energy, 2013
- Excellent catalytic effects of highly crumpled graphenenanosheets on hydrogenation/dehydrogenation of magnesium hydrideNanoscale, 2013
- Improved hydrogen storage kinetics of the Li–Mg–N–H system by addition of Mg(BH4)2Dalton Transactions, 2012
- Synthesis of porous Ni@rGO nanocomposite and its synergetic effect on hydrogen sorption properties of MgH2Journal of Materials Chemistry, 2012
- Mechanical Milling: a Top Down Approach for the Synthesis of Nanomaterials and NanocompositesNanoscience and Nanotechnology, 2012
- Site density effect of Ni particles on hydrogen desorption of MgH2International Journal of Hydrogen Energy, 2010
- Catalytic Effect of Nanoparticle 3d-Transition Metals on Hydrogen Storage Properties in Magnesium Hydride MgH2 Prepared by Mechanical MillingThe Journal of Physical Chemistry B, 2005
- Comparison of surface oxidation of titanium nitride and chromium nitride films studied by x-ray absorption and photoelectron spectroscopyJournal of Vacuum Science & Technology A, 1997
- The development of the Arrhenius equationJournal of Chemical Education, 1984