Abstract
Transparent and easily fabricated films were obtained through the coupling of eugenol, a bio-sourced feedstock, and poly(methylhydrosiloxane), via the Piers–Rubinsztajn reaction and Pt-catalysed hydrosilylation. The precursor reagents are readily available and economical, and the reaction process used was mild and easily undertaken. Additionally, poly(methylhydrosiloxane), having an abundant source of pendant Si–H groups, can be cross-linked with eugenol at multiple juncture points, and thus the eugenol content in these films ranges from 13.12 to 45.42 wt%. It was found that as the eugenol content increased, the thermal stability of the films also improved, with T10% and Rw at 700 °C ranging from 350.1 to 584.3 °C and 46.41 to 86.63%, respectively, which is higher than other analogous biomass-derived polysiloxanes. Crucially, the prepared films also exhibited suitable optical properties, with a >90% transmittance within the 430–1100 nm region and near 100% absorbance in the UV region (1.5) LED encapsulants and also in stacked multi-layer reflectors. In addition, to protect the encapsulated chips from moisture erosion, these films exhibit good water vapour barrier properties and water repellence.
Funding Information
  • China Scholarship Council
  • Guangdong Provincial Introduction of Innovative Research and Development Team (2016B090930010)
  • Ministerio de Economía y Competitividad (RYC-2014-16759, MAT2017-88382-P)

This publication has 83 references indexed in Scilit: