Surface modification of die casting mold steel by a composite technique of hot‐dipping and plasma electrolytic oxidation
Authors:
- 9 August 2012
- journal article
- Published by Wiley in Rare Metals
- Vol. 31 (4) , 362-367
Abstract
The hot dipping process of pure aluminum on H13 steel substrates followed by plasma electrolytic oxidation (PEO) was studied to form alumina ceramic coatings for protective purpose. H13 steel bars were first dipped in pure aluminum melts, and then, a reactive iron‐aluminum intermetallic layer grew at the interface between the melt and the steel substrate. The reactive layer was mainly composed of intermetallic Fe‐Al (Fe 2 Al 5 ); the thickness of aluminum layer and Fe‐Al intermetallic layer were mainly influenced by dipping time (1.5∼12.0 min) and dipping temperature (710∼760 °C). After PEO process, uniform Al 2 O 3 ceramic coatings were deposited on the surface of aluminized steel. The element distribution, phase composition and morphology of the aluminized layer, and the ceramic coatings were characterized by SEM/EDS and XRD. The distribution of hardness across the composite coating is demonstrated, and the maximum value reaches 1864 HV. The thermal shock resistance of the coated sample is also well improved.Keywords
This publication has 22 references indexed in Scilit:
- Influence of process parameters on electrolytic plasma discharging behaviour and aluminum oxide coating microstructureSurface and Coatings Technology, 2010
- Microstructure and corrosion resistance of ceramic coating on carbon steel prepared by plasma electrolytic oxidationSurface and Coatings Technology, 2010
- Characterisation of discharge events during plasma electrolytic oxidationSurface and Coatings Technology, 2009
- Effect of micro alloying elements on the interfacial reactions between molten aluminum alloy and tool steelJournal of Alloys and Compounds, 2009
- Microstructure, temperature estimation and thermal shock resistance of PEO ceramic coatings on aluminumJournal of Materials Processing Technology, 2008
- Interaction of steel with pure Al, Al–7Si and A356 alloysMaterials Science and Engineering: A, 2007
- Formation and progression of die soldering during high pressure die castingMaterials Science and Engineering: A, 2005
- Tribological behaviour of oxide/graphite composite coatings deposited using electrolytic plasma processSurface and Coatings Technology, 2004
- Mechanisms underlying the formation of thick alumina coatings through the MAO coating technologySurface and Coatings Technology, 2003
- Analysis of Phase Distribution for Ceramic Coatings Formed by Microarc Oxidation on Aluminum AlloyJournal of the American Ceramic Society, 1998