Influence of gamma irradiation on high density polyethylene/ethylene‐vinyl acetate/clay nanocomposites
- 11 October 2004
- journal article
- research article
- Published by Wiley in Polymers for Advanced Technologies
- Vol. 15 (10) , 601-605
Abstract
The study of high density polyethylene (HDPE)/ethylene‐vinyl acetate (EVA)/and organically‐modified montmorillonite (OMT) nanocomposites prepared by melt intercalation followed by exposure to gamma‐rays have been carried out. The morphology and properties of the nanocomposites were studied using X‐ray diffraction (XRD), transmission electron microscopy (TEM), thermogravimetric analysis (TGA) and cone calorimetry. The purpose of the study focuses on the influence of gamma irradiation on the morphology, thermal stability and flammability properties of the nanocomposites. XRD studies and TEM images verified that the ordered intercalated nanomorphology of the nanocomposites was not disturbed by gamma irradiation. TGA data showed that the nano‐dispersion of clay throughout the polymer inhibited the irradiation degradation of HDPE/EVA blend, which led to the nanocomposites exhibiting superior irradiation‐resistant properties than that of the pure blend. Cone calorimetry results indicated that the improvement in heat release rate (HRR) for irradiated HDPE/EVA blend was suppressed efficiently when clay was present. Increasing clay loading from 2 to 10% was beneficial by improving the flammability properties of the nanocomposites, but promoted a rapid increase in the sub‐peak HRR at high irradiation dose level. Copyright © 2004 John Wiley & Sons, Ltd.Keywords
This publication has 17 references indexed in Scilit:
- New Polylactide/Layered Silicate Nanocomposites. 3. High-Performance Biodegradable MaterialsChemistry of Materials, 2003
- Preparation and flammability properties of polyethylene–clay nanocompositesPolymer Degradation and Stability, 2003
- Influence of clay exfoliation on the physical properties of montmorillonite/polyethylene compositesPolymer, 2002
- Using polyamide-6 as charring agent in intumescent polypropylene formulationsI. Effect of the compatibilising agent on the fire retardancy performancePolymer Degradation and Stability, 2002
- PP/clay nanocomposites prepared by grafting-melt intercalationPolymer, 2001
- Synthesis and characterization of maleated polyethylene/clay nanocompositesPolymer, 2001
- Electron beam modification of thermoplastic elastomeric blends made from polyolefinsJournal of Materials Science, 2001
- The effect of high-energy electron beam on mechanical and thermal properties of LDPE and HDPEEuropean Polymer Journal, 2001
- Flammability Properties of Polymer−Layered-Silicate Nanocomposites. Polypropylene and Polystyrene NanocompositesChemistry of Materials, 2000
- Effect of γ-radiation on the molecular characteristics of low-density polyethylenePolymer, 2000