Short-channel effect immunity and current capability of sub-0.1-micron MOSFET's using a recessed channel
Authors:
- 1 August 1996
- journal article
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 43 (8) , 1251-1255
Abstract
Sub-0.1-/spl mu/m planar and gate recessed MOSFET's are investigated using both drift-diffusion and Monte Carlo simulations. In nonplanar devices, the influence of the gate corner explains that the threshold voltage roll-off can be almost suppressed. A steeper subthreshold slope (low swing) is also obtained for a channel length shorter than 50 nm when the recessed channel MOSFET is compared to its planar counterpart. The influence of the corner effect on high-current performances is also considered in relation with the electric field profile along the Si/SiO/sub 2/ interface.Keywords
This publication has 7 references indexed in Scilit:
- Short-channel-effect-suppressed sub-0.1-μm grooved-gate MOSFET's with W gateIEEE Transactions on Electron Devices, 1995
- Scaling the MOS transistor below 0.1 μm: methodology, device structures, and technology requirementsIEEE Transactions on Electron Devices, 1994
- Simulation of sub-0.1- mu m MOSFETs with completely suppressed short-channel effectIEEE Electron Device Letters, 1993
- Limits on Gate Insulator Thickness for MISFET Operation in Pure-Oxide and Nitrided-Oxide Gate Cases1991
- A study of the electrical performances of isolation structuresIEEE Transactions on Electron Devices, 1990
- The Monte Carlo Method for Semiconductor Device Simulation1989
- A fully scaled submicrometer NMOS technology using direct-write E-beam lithographyIEEE Transactions on Electron Devices, 1985