Effect of TiO2 nanotubes with TiCl4 treatment on the photoelectrode of dye-sensitized solar cells
Open Access
- 23 October 2012
- journal article
- Published by Springer Nature in Discover Nano
- Vol. 7 (1) , 579
Abstract
In this study, we used the electrochemical anodization to prepare TiO2 nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO2 nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 μm. After titanium tetrachloride (TiCl4) treatment, the walls of TiO2 nanotubes were coated with TiO2 nanoparticles. XRD patterns showed that the oxygen-annealed TiO2 nanotubes have a better anatase phase. The conversion efficiency with different lengths of TiO2 nanotube photoelectrodes is 3.21%, 4.35%, and 4.34% with 10, 20, and 30 μm, respectively. After TiCl4 treatment, the efficiency of TiO2 nanotube photoelectrode for dye-sensitized solar cell can be improved up to 6.58%. In the analysis of electrochemical impedance spectroscopy, the value of R k (charge transfer resistance related to recombination of electrons) decreases from 26.1 to 17.4 Ω when TiO2 nanotubes were treated with TiCl4. These results indicate that TiO2 nanotubes treated with TiCl4 can increase the surface area of TiO2 nanotubes, resulting in the increase of dye adsorption and have great help for the increase of the conversion efficiency of DSSCs.Keywords
This publication has 16 references indexed in Scilit:
- Dye-sensitized solar cells using TiO2 nanoparticles transformed from nanotube arraysJournal of Materials Science, 2010
- Fabrication of thin film dye sensitized solar cells with solar to electric power conversion efficiency over 10%Thin Solid Films, 2008
- Synthesis and growth mechanism of graded TiO2 nanotube arrays by two-step anodizationMaterials Science and Engineering: B, 2008
- Use of Highly-Ordered TiO2 Nanotube Arrays in Dye-Sensitized Solar CellsNano Letters, 2005
- High‐Aspect‐Ratio TiO2 Nanotubes by Anodization of TitaniumAngewandte Chemie International Edition, 2005
- Template‐Assisted Fabrication of Dense, Aligned Arrays of Titania Nanotubes with Well‐Controlled Dimensions on SubstratesAdvanced Materials, 2004
- Regulation of the Physical Characteristics of Titania Nanotube Aggregates Synthesized from Hydrothermal TreatmentChemistry of Materials, 2004
- Fabrication of tapered, conical-shaped titania nanotubesJournal of Materials Research, 2003
- Large Oriented Arrays and Continuous Films of TiO2-Based NanotubesJournal of the American Chemical Society, 2003
- Titanium oxide nanotube arrays prepared by anodic oxidationJournal of Materials Research, 2001