Biomechanical evaluation of locked plating fixation for unstable femoral neck fractures
Authors:
Open Access
- 1 June 2020
- journal article
- research article
- Published by British Editorial Society of Bone & Joint Surgery in Bone & Joint Research
- Vol. 9 (6) , 314-321
Abstract
Aims: Evaluate if treating an unstable femoral neck fracture with a locking plate and spring-loaded telescoping screw system would improve construct stability compared to gold standard treatment methods.Methods: A 31B2 Pauwels’ type III osteotomy with additional posterior wedge was cut into 30 fresh-frozen femur cadavers implanted with either: three cannulated screws in an inverted triangle configuration (CS), a sliding hip screw and anti-rotation screw (SHS), or a locking plate system with spring-loaded telescoping screws (LP). Dynamic cyclic compressive testing representative of walking with increasing weight-bearing was applied until failure was observed. Loss of fracture reduction was recorded using a high-resolution optical motion tracking system.Results: LP constructs demonstrated the highest mean values for initial stiffness and failure load. LP and SHS constructs survived on mean over 50% more cycles and to loads 450 N higher than CS. During the early stages of cyclic loading, mean varus collapse of the femoral head was 0.5° (SD 0.8°) for LP, 0.7° (SD 0.7°) for SHS, and 1.9° (SD 2.3°) for CS (p = 0.071). At 30,000 cycles (1,050 N) mean femoral neck shortening was 1.8 mm (SD 1.9) for LP, 2.0 mm (SD 0.9) for SHS, and 3.2 mm (SD 2.5) for CS (p = 0.262). Mean leg shortening at construct failure was 4.9 mm (SD 2.7) for LP, 8.9 mm (SD 3.2) for SHS, and 7.0 mm (SD 4.3) for CS (p = 0.046).Conclusion: Use of the LP system provided similar (hip screw) or better (cannulated screws) biomechanical performance as the current gold standard methods suggesting that the LP system could be a promising alternative for the treatment of unstable fractures of the femoral neck. Cite this article: Bone Joint Res 2020;9(6):314–321.Keywords
This publication has 40 references indexed in Scilit:
- In Vivo Hip Joint Loading during Post-Operative Physiotherapeutic ExercisesPLOS ONE, 2013
- Osteoporotic Hip Fractures: The Burden of Fixation FailureThe Scientific World Journal, 2013
- Biomechanical analysis of a novel femoral neck locking plate for treatment of vertical shear Pauwel's type C femoral neck fracturesInjury, 2012
- Biomechanical analysis of the sliding hip screw, cannulated screws and Targon® FN in intracapsular hip fractures in cadaver femoraInjury, 2011
- Effect of integrity of the posterior cortex in displaced femoral neck fractures on outcome after surgical fixation in young adultsInjury, 2011
- The effect of shortening and varus collapse of the femoral neck on function after fixation of intracapsular fracture of the hipThe Journal of Bone and Joint Surgery. British volume, 2008
- Surgical treatment of undisplaced femoral neck fractures in the elderlyInternational Orthopaedics, 2006
- ASSESSING LEG LENGTH DISCREPANCY AFTER FEMORAL FRACTURE: CLINICAL EXAMINATION OR COMPUTED TOMOGRAPHY?Anz Journal of Surgery, 2005
- Complications after intracapsular hip fractures in young adultsInjury, 2005
- Do variations in hip geometry explain differences in hip fracture risk between japanese and white americans?Journal of Bone and Mineral Research, 1994