Modeling of Bake Hardening Kinetics and Carbon Redistribution in Dual‐Phase Steels
Open Access
- 3 September 2020
- journal article
- research article
- Published by Wiley in Steel Research International
- Vol. 92 (1)
Abstract
The bake hardening response (BHR) of a dual‐phase steel with a martensite volume fraction of 0.22 is studied by means of mechanical testing, microstructural characterization, and computational simulation. After austenitization and quenching, the material is exposed to temperatures between 100 and 220 °C for times up to 10 000 min. The increase in yield strength during bake hardening (BH) follows the well‐known two‐stage characteristics. Herein, the kinetics of BH is analyzed on the basis of computational models for the formation of Cottrell atmospheres and precipitation, which represent the cause of strength increase, as well as the long‐range diffusion of C, which is partitioning between the martensite and ferrite phases during aging. The simulated yield strength evolution is in good agreement with the experiments. The model clearly describes the shape of the experimentally observed BH curves as a function of temperature, time, and degree of prestrain. In contrast to previous simulation attempts, all metallurgical phenomena are treated as coupled processes and modeled in an integrated framework based on a single set of input and state parameters.Keywords
Funding Information
- Austrian Science Fund (I 2133)
- Deutsche Forschungsgemeinschaft (PA 837/33-1)
This publication has 42 references indexed in Scilit:
- Microstructures formation and phase transformations around the interface of welds between dissimilar steelsMATEC Web of Conferences, 2013
- Deformation and fracture mechanisms in fine- and ultrafine-grained ferrite/martensite dual-phase steels and the effect of agingActa Materialia, 2011
- Characterization of the Bake-hardening Behavior of Transformation Induced Plasticity and Dual-phase Steels Using Advanced Analytical TechniquesISIJ International, 2010
- Comparison of the Dislocation Density in Martensitic Steels Evaluated by Some X-ray Diffraction MethodsISIJ International, 2010
- Competition between grain boundary segregation and Cottrell atmosphere formation during static strain aging in ultra low carbon bake hardening steelsActa Materialia, 2004
- Physics and phenomenology of strain hardening: the FCC caseProgress in Materials Science, 2003
- Kinetics of Cottrell atmosphere formation during strain aging of ultra-low carbon steelsMaterials Letters, 2000
- Process Factors for Cold-rolled Dual-phase Sheet SteelsTransactions of the Iron and Steel Institute of Japan, 1981
- Development of Bake-hardenable Al-killed Steel Sheet by Box-annealing ProcessTransactions of the Iron and Steel Institute of Japan, 1981
- Precipitation of Carbon and Nitrogen in Cold-Worked Alpha-IronPhysical Review B, 1951