Prediction of Bearing Capacity of Ring Foundation on Dense Sand with Regard to Stress Level Effect
Authors:
- 1 November 2018
- journal article
- research article
- Published by American Society of Civil Engineers (ASCE) in International Journal of Geomechanics
- Vol. 18 (11)
Abstract
This paper uses finite-element formulation of the lower bound theorem to determine the bearing capacity of ring foundations on dense sand. The results are validated with the plasticity solutions, numerical analyses, laboratory small-scale model tests, and field plate loading tests available in the literature. The Bolton strength–dilatancy relation is then adopted to consider the dependency of the friction angle on the stress level. For solid circular footings, the present results agree well with centrifuge model tests. However, a considerable discrepancy exists between numerical analyses and centrifuge model tests for the ring foundation, particularly when the radii ratio exceeds 0.5. An alternative method is proposed, in which a resistance ratio of the ring foundation to the solid circular footing with the same size is applied to an approximate equation for the bearing capacity of the solid circular footing regarding the stress level effect. The proposed approach is verified with centrifuge model tests.Keywords
This publication has 68 references indexed in Scilit:
- Bearing capacity factor Nc under ϕ=0 condition for piles in claysInternational Journal for Numerical and Analytical Methods in Geomechanics, 2008
- Effects of Footing Size and Aspect Ratio on the Bearing Capacity of Sand Subjected to Eccentric LoadingSoils and Foundations, 2002
- A “Class A” Prediction of the Bearing Capacity of Plane Strain Footings on SandSoils and Foundations, 1999
- Numerical Simulation of Bearing Capacity Characteristics of Strip Footing on SandSoils and Foundations, 1999
- Confining Stress Dependency of Mechanical Properties of SandsSoils and Foundations, 1999
- Prediction of Ultimate Bearing Capacity of Surface Footings with Regard to Size EffectsSoils and Foundations, 1998
- Centrifuge Model Tests on Bearing Capacity And Deformation of Sand Layer Overlying ClaySoils and Foundations, 1997
- Variation in Bearing Capacity Factors of Dense Sane Assessed by Model Loading TestsSoils and Foundations, 1990
- Influence of the Foundation Width on the Bearing Capacity FactorSoils and Foundations, 1988
- Strength and Deformation Characteristics of Saturated Sand at Extremely Low PressuresSoils and Foundations, 1984