Effect of Metal-Precursor Stacking Order on Volume-Defect Formation in CZTSSe Thin Film: Formation Mechanism of Blisters and Nanopores
- 16 June 2022
- journal article
- research article
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (27) , 30649-30657
Abstract
In this study, we investigated the effect of the stacking order of metal precursors on the formation of volume defects, such as blisters and nanopores, in CZTSSe thin-film solar cells. We fabricated CZTSSe thin films using three types of metal-precursor combinations, namely, Zn/Cu/Sn/Mo, Cu/Zn/Sn/Mo, and Sn/Cu/Zn/Mo, and studied the blister formation. The blister-formation mechanism was based on the delamination model, taking into consideration the compressive stress and adhesion properties. A compressive stress could be induced during the preferential formation of a ZnSSe shell. Under this stress, the adhesion between the ZnSSe film and the Mo substrate could be maintained by the surface tension of a metallic liquid phase with good wettability, or by the functioning of ZnSSe pillars as anchors, depending on the type of metal precursor used. Additionally, the nanopore formation near the back-contact side was found to be induced by the columnar microstructure of the metal precursor with the Cu/Zn/Mo stacking order and its dezincification. Based on the two volume-defect-formation mechanisms proposed herein, further development of volume-defect-formation suppression technology is expected to be made.Keywords
Funding Information
- National Research Foundation of Korea (2021R1G1A1006384, 2022M3J1A1085371)
- Ministry of Science, ICT and Future Planning (22-CoE-ET-01, 22-ET-08)
This publication has 44 references indexed in Scilit:
- Fabrication of Cu2ZnSnS4 films by sulfurization of Cu/ZnSn/Cu precursor layers in sulfur atmosphere for solar cellsSolar Energy Materials and Solar Cells, 2011
- Device characteristics of a 10.1% hydrazine‐processed Cu2ZnSn(Se,S)4 solar cellProgress in Photovoltaics: Research and Applications, 2011
- Fabrication of 7.2% Efficient CZTSSe Solar Cells Using CZTS NanocrystalsJournal of the American Chemical Society, 2010
- The influence of oxides on the performance of advanced gas turbinesJournal of the European Ceramic Society, 2008
- Thin‐film solar cells: device measurements and analysisProgress in Photovoltaics: Research and Applications, 2004
- One step electrodeposition of CuInSe2: Improved structural, electronic, and photovoltaic properties by annealing under high selenium pressureJournal of Applied Physics, 1996
- A model for the successful growth of polycrystalline films of CuInSe2 by multisource physical vacuum evaporationAdvanced Materials, 1993
- Diode quality factor determination for thin-film solar cellsSolar Cells, 1989
- Argon Entrapment and Evolution in Sputtered TaSi2 FilmsJournal of the Electrochemical Society, 1985
- The role of implanted gas and lateral stress in blister formation mechanismsJournal of Nuclear Materials, 1978