Preparation and Investigation of Nano-TiO2-Modified Silicone-Based Reflective Thermal Insulation Coatings
Open Access
Abstract
A nano-TiO2-modified silicone-based reflective thermal insulation coating is successfully synthesized. The influence of the nano-TiO2 content on the microstructure, adhesion strength as well as near-infrared reflectivity (NIR) of the coatings before and after heat treatment is investigated. The results demonstrate that the coating is an organic/inorganic composite coating composed of muscovite, rutile-phase titanium dioxide and an organosilicon binder before heat treatment. The addition of an appropriate amount of nano-TiO2 helps fill the pores in the coating, resulting in a dense coating and improved adhesion. Meanwhile, due to the reduced average size of the pigment, the reflectance of the coating is maintained or enhanced. When the addition amount is 5.0 wt.%, the coating achieves the highest bonding strength of Grade 1 with a reflectivity of 0.830. After heat treatment at 1000 °C for an hour, the coating transforms into an inorganic coating composed of partially melted muscovite and rutile-phase TiO2. The nano-TiO2 promotes the formation of a molten phase, which further increases the coating density and makes the surface smoother. Consequently, the coating’s bonding strength and reflectance are further improved, reaching Grade 0 and 0.945 respectively.Keywords
Funding Information
- National Natural Science Foundation of China (52473280)
- Science and Technology Department of Guangxi Zhuang Autonomous Region (AA23062025-3)
- MEXT Strategic Professional Development Program for Young Researchers of Japan (J250000163)
This publication has 21 references indexed in Scilit:
- Synergetic effect of O-POSS and T-POSS to enhance ablative resistant of phenolic-based silica fiber composites via strong interphase strength and ceramic formationComposites Part A: Applied Science and Manufacturing, 2022
- Optically-switchable thermally-insulating VO2-aerogel hybrid film for window retrofitsApplied Energy, 2020
- Synthesis and characterization of the pearlescent pigments based on mica deposited with SiO2, AlN and TiO2: First report of its dielectric propertiesCeramics International, 2020
- Effect of silanol on the thermal stability of poly[methyl(trifluoropropyl)siloxane]Journal of Applied Polymer Science, 2020
- A strategy of hierarchical particle sizes in nanoparticle composite for enhancing solar reflectionInternational Journal of Heat and Mass Transfer, 2019
- A novel high-temperature-resistant polymeric material for cables and insulated wires via the ceramization of mica-based ceramifiable EVA compositesComposites Science and Technology, 2016
- The epoxy-siloxane/Al composite coatings with low infrared emissivity for high temperature applicationsApplied Surface Science, 2010
- Effect of Inorganic Components on Thermal Stability of Methylsiloxane-Based Inorganic/Orgnaic HybridsJournal of Sol-Gel Science and Technology, 2005
- Synthesis, characterization and thermal properties of SiH and SiOH terminated hybrid polysiloxanesMacromolecular Chemistry and Physics, 2000
- The thermal degradation of polysiloxanes—Part 4: Poly(dimethyl/diphenyl siloxane)Polymer Degradation and Stability, 1980