Practical correlation for thermal resistance of horizontal enclosed airspaces with downward heat flow for building applications
Author:
- 20 August 2013
- journal article
- research article
- Published by SAGE Publications in Journal of Building Physics
- Vol. 37 (4) , 403-435
Abstract
The 2009 ASHRAE Handbook of Fundamentals (Chapter 26) provides a table that contains the thermal resistances (R-values) of enclosed airspaces for different values of airspace thickness, effective emittance, mean airspace temperature, and temperature differences across the airspace. This table is extensively used by modelers, architects, and building designers in the design for thermal resistance of building enclosures. The effect of the airspace aspect ratio (length/thickness) on the R-value is not accounted for in the ASHRAE (American Society of Heating, Refrigerating and Air-Conditioning Engineers) table. However, in previous studies, it was shown that the aspect ratio of the airspace can affect its R-value. In this article, the previous studies by the author who focused on determining the R-value for vertical enclosed airspaces and horizontal enclosed airspace under upward heat flow condition are extended to investigate the effect of the aspect ratio on the R-value of horizontal enclosed airspaces under a downward heat flow condition for different airspace thicknesses and having a wide range of values for effective emittance, mean temperature, and temperature differences across the airspaces. The R-values predicted from numerical simulation are compared with those provided in the ASHRAE table. Considerations were also given to investigate the potential increase in the R-values of enclosed airspaces when a thin sheet is placed horizontally in the middle of the airspace and whose surfaces have different values of emissivity. Thereafter, practical correlation was developed for determining the R-values of horizontal enclosed airspaces for future use by modelers, architects, and building designers. The simplicity of this correlation derived for horizontal airspaces under downward heat flow condition together with those that were previously developed for vertical airspaces and horizontal airspaces under upward heat flow condition suggests that these correlations could be included in the ASHRAE Handbook of Fundamentals.Keywords
This publication has 9 references indexed in Scilit:
- Practical correlations for thermal resistance of horizontal enclosed airspaces with upward heat flow for building applicationsBuilding and Environment, 2013
- Practical correlations for the thermal resistance of vertical enclosed airspaces for building applicationsBuilding and Environment, 2013
- Thermal performance of wall assemblies with low emissivityJournal of Building Physics, 2012
- Investigation of thermal performance of reflective insulations for different applicationsBuilding and Environment, 2012
- Numerical modeling and experimental investigations of thermal performance of reflective insulationsJournal of Building Physics, 2012
- 3D heat and air transport model for predicting the thermal resistances of insulated wall assembliesJournal of Building Performance Simulation, 2012
- Thermal response of basement wall systems with low-emissivity material and furred airspaceJournal of Building Physics, 2011
- Thermal analysis of above-grade wall assembly with low emissivity materials and furred airspaceBuilding and Environment, 2011
- Assessment of reflective insulations for residential and commercial applications1983