Numerical simulation of heat transfer and fluid flow in GTA/Laser hybrid welding
Authors:
- B. RibicBRB. Ribic
- R. RaiRRR. Rai
- T. DebRoyTDT. DebRoy
- 1 November 2008
- journal article
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 13 (8) , 683-693
Abstract
In order to understand the temperature fields, cooling rates and mixing in the weld pool, a comprehensive, three-dimensional heat transfer and fluid flow model is developed and tested by comparing model predictions with two sets of experimental data. The first set of data was taken from the literature. The experiments varied the separation distance between the heat sources for three arc current levels at a constant laser power. The second set of experiments analysed the effect of varying laser power for a constant heat source separation distance. The results demonstrate that the distance between the two heat sources significantly affects the cooling rates. The calculated results showed that the hybrid weld pool was very well mixed with strong convection currents resulting from the interaction between the electromagnetic and Marangoni forces. The calculated and experimental results showed that hybrid welding increases the weld pool width and gap bridgability when compared with laser welding. The weld pool depth in hybrid welding was affected mainly by the characteristics of the laser beam. Hybrid weld pool penetration depth is maximised at an optimal distance between the arc electrode and laser beam. The cooling rate increases significantly when the heat sources are separated beyond a critical distance. At close separation between arc and laser, calculations show that the arc radius must be decreased to achieve the observed weld depths.Keywords
This publication has 63 references indexed in Scilit:
- Microstructure and mechanical properties of AA7075(T6) hybrid laser/GMA weldsMaterials Science and Engineering: A, 2007
- Effects of gas shielding parameters on weld penetration of CO2 laser-TIG hybrid weldingJournal of Materials Processing Technology, 2007
- Investigation on Pore Formation during Hybrid Laser-Tungsten Inert Gas Arc Welding of Magnesium Alloy AZ31BMaterials Science Forum, 2005
- Welding of AZ31B Magnesium Alloy by YAG Laser/ TIG Arc Hybrid Welding ProcessMaterials Science Forum, 2004
- Macroporosity free aluminum alloy weldments through numerical simulation of keyhole mode laser weldingJournal of Applied Physics, 2003
- Welding of Thin Steel Plates by Hybrid Welding Process Combined TIG Arc with YAG LaserJSME International Journal Series A, 2003
- Laser Beam Welding With Simultaneous Gaussian Laser PreheatingJournal of Heat Transfer, 1993
- Emission spectroscopy of plasma during laser welding of AISI 201 stainless steelMetallurgical Transactions B, 1989
- ENTHALPY-POROSITY TECHNIQUE FOR MODELING CONVECTION-DIFFUSION PHASE CHANGE: APPLICATION TO THE MELTING OF A PURE METALNumerical Heat Transfer, 1988
- A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problemsInternational Journal of Heat and Mass Transfer, 1987