Dynamic deformations in sand embankments: centrifuge modeling and blind, fully coupled analyses
Authors:
- Kanthasamy K MuraleetharanKMKanthasamy K Muraleetharan
- Sachin DeshpandeSDSachin Deshpande
- Korhan AdalierKAKorhan Adalier
- 1 February 2004
- journal article
- Published by Canadian Science Publishing in Canadian Geotechnical Journal
- Vol. 41 (1) , 48-69
Abstract
Prediction of deformations during earthquake loading is one of the critical aspects in the design of a geotechnical engineering structure. The dynamic behavior of two centrifuge model sand embankments including deformations is presented and compared with blind predictions made by a fully coupled analysis procedure, the computer code DYSAC2, using a bounding surface elastoplastic model. The centrifuge model embankments were constructed using Nevada sand placed at 62% (dense) and 43% (medium dense) relative densities and consisted of a mild slope on one side and a steep slope on the other side. Both embankments showed substantial movements along the slopes, spikes in the upslope acceleration values, and corresponding dilation spikes in the pore-pressure values. These spikes were more pronounced for the medium-dense sand embankment and on the mild-slope sides for both embankments. The observed behavior is related to the stress–strain behavior of sands undergoing cyclic mobility, and the importance of accurately obtaining the initial static stresses is emphasized. The blind predictions using the computer code DYSAC2 compared reasonably well with the measured results and provided further insight into the behavior of these embankments. The blind predictions similar to those shown in this paper are expected to provide confidence for practicing engineers to use fully coupled procedures for predicting deformations of geotechnical structures subjected to earthquakes.Key words: centrifuge modeling, cyclic mobility, earthquakes, embankment, fully coupled analysis, sand.Keywords
This publication has 14 references indexed in Scilit:
- Earthquake-related deformation beneath gently inclined groundGéotechnique, 1998
- Use of Centrifuge and Numerical Modeling in Design of Pier 400 at the Port of Los AngelesTransportation Research Record: Journal of the Transportation Research Board, 1997
- Analysis of Site Liquefaction and Lateral Spreading Using Centrifuge Testing RecordsSoils and Foundations, 1996
- A fully coupled non‐linear dynamic analysis procedure and its verification using centrifuge test resultsInternational Journal for Numerical and Analytical Methods in Geomechanics, 1994
- Centrifuge modelling of sand embankments and islands in earthquakesGéotechnique, 1988
- A state parameter for sandsGéotechnique, 1985
- Considerations in the earthquake-resistant design of earth and rockfill damsGéotechnique, 1979
- Improved numerical dissipation for time integration algorithms in structural dynamicsEarthquake Engineering & Structural Dynamics, 1977
- Plastic Internal Variables Formalism of Cyclic PlasticityJournal of Applied Mechanics, 1976
- Effects of Earthquakes on Dams and EmbankmentsGéotechnique, 1965