Off-axis compression behaviour of honeycomb core in WT-plane
Authors:
- 29 April 2009
- journal article
- research article
- Published by Taylor & Francis in International Journal of Crashworthiness
- Vol. 14 (2) , 173-181
Abstract
The applicability of honeycomb cores for energy absorption is dictated by their sensitivity to compression-dominated combined loading, especially at dynamic rates. In the present study, a combined loading state has been achieved using off-axis compression specimens. The effects of off-axis angle, test speed and core thickness on the crush initiation strength, average crush stress and failure modes in Nomex honeycomb cores have been studied experimentally. The compression tests on end-stabilised honeycomb specimens with off-axis angles of 0°, 5°, 15°, 30° and 45° in the WT-plane were conducted at stroke rates of 2.12 × 10− 5, 0.0254 and 0.254 m/s. It was observed from the test data that the crush initiation load and crush stress increase with test speed but decrease as off-axis angle is increased. A smoother transition from the initial linear-elastic region to the crush region was observed with increasing off-axis angles. Buckling-initiated cell wall folding mechanism was prevalent in specimens with off-axis angles less than 30°, while cell collapse prevailed at higher off-axis angles. The results indicate that the off-axis loading must be limited to utilise the energy absorption capability of the cell wall material.Keywords
This publication has 9 references indexed in Scilit:
- Crush Behaviors of Aluminum Honeycombs of Different Cell Geometries Under Compression Dominant Combined LoadsSAE International Journal of Advances and Current Practices in Mobility, 2006
- Crush dynamics of square honeycomb sandwich coresInternational Journal for Numerical Methods in Engineering, 2005
- Honeycomb Specimens Under Combined Compressive and Shear Displacement ConditionsSAE International Journal of Advances and Current Practices in Mobility, 2005
- Microstructural response of aluminum honeycomb to combined out-of-plane loadingMechanics of Materials, 2003
- Influence of Shear Loads on Crush of Honeycomb MaterialsSAE International Journal of Advances and Current Practices in Mobility, 2002
- CRUSHING BEHAVIOUR OF ALUMINIUM HONEYCOMBS UNDER IMPACT LOADINGInternational Journal of Impact Engineering, 1998
- Dynamic and Static Compression Tests for Paper Honeycomb Cores and Absorbed Energy.JSME International Journal Series A, 1998
- Axial crush of metallic honeycombsInternational Journal of Impact Engineering, 1997
- Crushing analysis of metal honeycombsInternational Journal of Impact Engineering, 1983