An investigation on the rheology, morphology, thermal and mechanical properties of recycled poly (ethylene terephthalate) reinforced with modified short glass fibers
- 20 June 2008
- journal article
- research article
- Published by Wiley in Polymer Composites
- Vol. 30 (7) , 993-999
Abstract
This work was done with the aim to solve an important environmental issue regarding poly (ethylene terephthalate), (PET) wastes. Samples of recycled PET (r‐PET) were reinforced with 10 to 30 wt% modified short glass fibers (SGF) through a melt mixing process in an internal mixer and their performance were assessed and compared with those of commercial glass reinforced PET through investigation of their rheology, morphology, thermal, and mechanical properties. It was found that the mechanical properties of the glass reinforced r‐PET composites in most cases were comparable or even higher than those of the commercial grades. The impact strength of the 30 wt% SGF filled r‐PET composite was about 30% higher than the commercial grades. This led to a conclusion that the PET wastes can be successfully converted to easily moldable thermoplastic materials by incorporation of 30 wt% SGF having a good balance of properties. Through investigation of rheological and morphological properties the optimum conditions for the best reinforcement performance were determined. The r‐PET with 30 wt% glass fiber content showed the highest level of orientation and improved interaction with the r‐PET matrix while having an acceptable flow behavior and processability. In spite of significant fiber breakage during the melt mixing process, leading to about 20 times reduction in the fiber aspect ratio, the composites maintained their good mechanical properties and showed a shear thinning behavior at high shear rates. The incorporated glass fibers acted as nucleating agents and improved the crystallization rate of r‐PET leading to an overall increase in the crystallinity. POLYM. COMPOS., 2009. © 2008 Society of Plastics EngineersKeywords
This publication has 21 references indexed in Scilit:
- Studies on melt spinning process of hollow polyethylene terephthalate fibersPolymer Engineering & Science, 2006
- Simultaneous glycolysis and hydrolysis of polyethylene terephthalate and characterization of products by differential scanning calorimetryPolymer, 2003
- Methanolysis of polyethylene terephthalate (PET) in the presence of aluminium tiisopropoxide catalyst to form dimethyl terephthalate and ethylene glycolPolymer Degradation and Stability, 2003
- Compatibilization and properties of poly(ethylene terephthalate)/polyethylene blends based on recycled materialsMacromolecular Chemistry and Physics, 2002
- Recycling of poly(ethylene terephthalate) as polymer‐polymer compositesPolymer Engineering & Science, 2002
- Study of thermal and mechanical properties of virgin and recycled poly(ethylene terephthalate) before and after injection moldingEuropean Polymer Journal, 2000
- Characterization of scrap poly(ethylene terephthalate)European Polymer Journal, 2000
- Microscopical damage mechanisms in glass fiber reinforced polypropyleneJournal of Applied Polymer Science, 1998
- Competition between degradation and chain extension during processing of reclaimed poly(ethylene terephthalate)Polymer Degradation and Stability, 1998
- Morphology and mechanical properties of injection molded articles with weld‐linesPolymer Engineering & Science, 1997