Mechanical Properties Test and Simulation Analysis of Glass Coated Amorphous Filaments
Authors:
Open Access
- 1 August 2021
- conference paper
- Published by IOP Publishing in Journal of Physics: Conference Series
- Vol. 1995 (1) , 012011
Abstract
Taking the Co68.7Fe4Ni1B13Si11Mo2.3 glass-coated amorphous microwire as the research object, the mechanical properties of the amorphous wire were tested through biaxial tensile experiments, and the fracture deformation process of the amorphous wire was analyzed. Based on the experimental data, the finite element method was used The simulation software ABAQUS numerically simulates the tensile deformation of the amorphous wire, and the fracture relationship between the glass cladding layer and the core wire, and further reveals the tensile deformation fracture behavior of the amorphous wire was analyzed. The experimental results indicate that the fabricated microwires exhibit good tensile properties, and the maximum tensile breaking strength can reach 2918MPa; the fracture of the amorphous wire is a typical brittle fracture, and there is no obvious yield phenomenon. The tensile mechanics simulation results of the amorphous wire are consistent with the experimental results. The glass cladding layer breaks before the core wire, and the stress transfer effect in the amorphous wire is good. The model fracture is consistent with the fracture morphology of the amorphous wire. These results show that the amorphous wire exhibits good tensile properties and stress transmission capabilities, confirming the huge application potential of amorphous wire materials in sensor applications and functional composite materials.Keywords
This publication has 17 references indexed in Scilit:
- Composite electroplating to enhance the GMI output stability of melt-extracted wiresMaterials & Design, 2016
- Sample size and preparation effects on the tensile ductility of Pd-based metallic glass nanowiresActa Materialia, 2015
- Investigation of structural and magnetic properties of Ce3+-substituted nanosized Co–Cr ferrites for a variety of applicationsJournal of Alloys and Compounds, 2015
- Stress and field contactless sensor based on the scattering of electromagnetic waves by a single ferromagnetic microwireApplied Physics Letters, 2014
- Optimization of mechanical and giant magneto‐impedance (GMI) properties of melt‐extracted Co‐rich amorphous microwiresPhysica Status Solidi (a), 2014
- Preparation and giant magneto-impedance behavior of Co-based amorphous wiresIntermetallics, 2013
- Relating residual stress and microstructure to mechanical and giant magneto-impedance properties in cold-drawn Co-based amorphous microwiresActa Materialia, 2012
- Nanocrystallization enabled tensile ductility of Co-based amorphous microwiresScripta Materialia, 2012
- Large GMI effect in Co-rich amorphous wire by tensile stressJournal of Magnetism and Magnetic Materials, 2011
- Giant magneto-impedance and stress-impedance effects of microwire composites for sensing applicationsSolid State Communications, 2011