A Current-Efficient, Low-Dropout Regulator with Improved Load Regulation
Authors:
- Luis GutierrezLGLuis Gutierrez
- Elkim RoaERElkim Roa
- Hugo HernandezHHHugo Hernandez
- 1 April 2009
- conference paper
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-4
Abstract
This paper presents a novel topology for LDO regulators, improving load regulation with very low quiescent current. The core of the circuit is made by operating the pass transistor in the linear region, achieving an area reduction above 90%, reducing the gate capacitance and therefore improving loop response. The proposed structure to improve the load regulation is based on transconductance cells and current mirrors, allowing to sink the remaining energy on the compensation capacitor without affecting battery lifetime. This design was developed in AMS 0.35 mum technology and occupies only 0.025 mm2 with a quiescent current of 10 muA. The proposed LDO can deliver 50 mA @ 3.3 V with 200 mV dropout, a load regulation of 591 nV/mA and is able to recover within 3 mus for any load transient. Extensive post-layout simulations and monte carlo analysis were performed in order to validate these results.Keywords
This publication has 3 references indexed in Scilit:
- A High Slew-Rate Push–Pull Output Amplifier for Low-Quiescent Current Low-Dropout Regulators With Transient-Response ImprovementIEEE Transactions on Circuits and Systems II: Analog and Digital Signal Processing, 2007
- A Transient-Enhanced Low-Quiescent Current Low-Dropout Regulator With Buffer Impedance AttenuationIEEE Journal of Solid-State Circuits, 2007
- A low-voltage, low quiescent current, low drop-out regulatorIEEE Journal of Solid-State Circuits, 1998